Category List
Best Sellers
Our most popular items!
Female Spade Terminal with Heat Shrink (Pack of 4)
TE-207-000

This is a 4-pack of female spade terminal ends (F2 Terminals, 0.250" FASTON receptacles) and heat shrink.

$1.69
30 Ready to Ship!
IG32 Right Angle 12VDC 083 RPM Gear Motor
TD-035-083

These right angle gearmotors have a rated speed of 83 RPM and a gear reduction of 1:71. They work great on our robots as well as your own applications. These geared motors serve as excellent robot motors, but work great for other uses.

$44.77
45 Ready to Ship!
SuperDroid Robots - SuperDroid Robots - Breakout Boards and MCU Accessories
Category
Electrical & Controls  >  Programmable Controllers  >  Breakout Boards and Microcontroller Accessories

Breakout Boards and Microcontroller Accessories

Breakout boards to easilly add additional functionality to your microcontroller or single board computer (SBC). We also sell hookup kits and accessories to more easily prototype and integrate additional circuits into your project.


The answers to the most common questions we get can be found on our support pages. Building a robot from scratch? We have instructional videos to get you going!


Looking for some sample code? Please visit us on GitHub.


Can't quite find what you're looking for on our support pages? Have specific questions about your project? Stop by and visit our forums.

Category Items
Sort By:  View: 

 Only In-Stock Items 

Encoder Buffer Hookup Kit
This kit provides you with the connectors/receptacles, crimp pins and wire to with our LS7366R Encoder Buffer Breakout (TE-183-002)
TE-215-001
$11.99
20 Ready to Ship!
Dual LS7366R Quadrature Encoder Buffer Breakout Board
This is a breakout board based on US Digital’s LS7366R quadrature counter IC. The LS7366R makes it simple to keep track of the current position of the motors and the total distance traveled.
TE-183-002
$45.68
20 Ready to Ship!
RS485 Breakout Board
This is a breakout board for the ST485E tranceiver IC. The ST485 can convert a TTL signal from a microcontroller, such as an Arduino, to RS485.
TE-181-000
$14.65
14 Ready to Ship!
Kangaroo x2 motion controller
Kangaroo x2 adds self-tuning feedback motion control to your Sabertooth or SyRen motor driver. It can be used with quadrature encoders or potentiometers to provide position or speed control. Made by Dimension Engineering.
TE-180-000
$23.99
1 Ready to Ship!
Pololu USB AVR Programmer
This device is a programmer for AVR-based controllers, such as the 3pi robot. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software.
MCU-052-000
$19.95
17 Ready to Ship!
Compact Prototype Daughter Board
Modtronix Assembled Compact Prototype daughter board, connector assembled. This board will plug into the daughter board connector of any of Modtronix Main Boards(SBCs).
MCU-037-000
$4.50  $2.50
1 Ready to Ship!
OOPic SCP VB6 Software Interface
Release 3 NOW available! Serial Control Protocol is a set of instructions to provide access to bits, bytes, words, and other data. Use this program to easily monitor and control your OOPic. Included are free updates and the VB6 source code.
TE-071-000
$44.00
PWM to PIC Hookup Kit
This kit provides you with the connectors/receptacles, crimp pins and wire to interface 2 or our PWM motor controllers with microcontroller with standard pins, such as the OOPic-R or OOPic II/II+.
TE-061-000
$6.20
23 Ready to Ship!
6 inch 40-Pin Ribbon Cable
This is a 40 pin ribbon cable with two 2x20 0.1 inch female spaced headers on each end. It is 6 inches long.
MCU-013-000
$5.95  $4.40
8 Ready to Ship!
40 Pin Single Ended Header Cable with Crimps
This is a single ended 40 pin Ribbon cable with crimps. The cable can be used to connect the OOPic or Magnevation PWM to other devices.
MCU-028-000
$7.95
7 Ready to Ship!
Magnevation Network Cable with Termination
This cable is used to connect the OOPic to another OOPic through the networked I2C bus. The termination cable has built in pull up terminators so that the user does not have to add a terminator to the bus.
MCU-022-001
$12.00  $0.99
18 Ready to Ship!
OOPic-R Expansion Card
No other Robot kit offers this - an interface card to allow plug and play with your Robot! This package includes a custom circuit board with the entire component and the hardware to interface with an OOPic-R MCU. Includes CD
TE-006-000
$48.00  $24.00
5 Ready to Ship!
Trekker OOPic-R Electronics Kit
This package is a breadboard that mounts directly to the SuperDroid Trekker Chassis or prototyping along with the basic electronic components to interface the Trekker to the OOPic-R. Includes CD
TE-005-000
$11.95  $6.95
2 Ready to Ship!
Trekker OOPIC II Electronics Kit
This package is a breadboard that mounts directly to the SuperDroid Trekker Chassis or prototyping along with the basic electronic components to interface the Trekker to the OOPic-II . Includes CD
TE-002-000
$25.00  $12.00
3 Ready to Ship!
OOPic II Expansion Card
No other Robot kit offers this - an interface card to allow plug and play with your Robot! This package includes a custom circuit board with the entire component and the hardware to interface with an OOPic II/III MCU. Includes CD
TE-001-000
$54.00  $26.00
3 Ready to Ship!
Breakout boards and accessories for your Arduino, mBed, ARM, Basic Micro or any other microcontroller platform.
Custom Robot Request

We specialize in designing and fabricating custom robots and other electro-mechanical devices.

You can also get a quote for custom mechanical, software, and electronics engineering services. We can also do your custom CNC work, general fabrication, and welding.

1-919-557-9162

Need an easier way to pay? PayPal now offers easier payment methods!

New Tactical Robot Website!

Looking for our Tactical Robots? We've created a new, dedicated website to better serve our customers. Please click the image below to visit the new SDRTactical.com!

New Items
ATR Rigid Bumper Assembly
TD-133-000

This is a rigid bumper that will mount on the front or back of most of our All Terrain Wheeled Robots. The bumper is made of bent aluminum providing a very rigid and sturdy bumper that protects the robot from driving up obstacles.

$74.00
Built to Order
2-6 Days
Programmable xBee Control Interface Package
TE-900-004

This package allows you to control a robot, out of the box, using the power of Arduino and xBee. The remote comes standard with an ABS enclosure and your option of 2, 3, or 4-axis joystick.Full source code is provided!

$589.49
Built to Order
1-2 Weeks
Powered by SuperDroid Robots, Inc