Category List
Best Sellers
Our most popular items!
2 Line LCD Mounting Hardware and cover
LCD-005-000

This is the mounting hardware and LCD cover for the 2x16 LCD. It is the same cover that is shown on the Trekker Standard LCD Package.

$6.00
7 Ready to Ship!
Trekker Sweeping SRF04 Ultrasonic Scanner Package
TS-006-004

Trekker Sweeping Ultrasonic Scanner Package. The servo can be programmed to scan at any angle from -90 to +90 degrees. This gives the Trekker a set of eyes. The Ultrasonic detector can detect from ~4 inches to ~10 feet.

$57.95
4 Ready to Ship!
Specials - SuperDroid Robots
Category
Specials

Specials

These are items we have set aside as specials. Some are overstock, others are just good deals. We will do our best to keep this list updated routinely.


The answers to the most common questions we get can be found on our support pages.

Category Items
Sort By:  View: 

 Only In-Stock Items: 

2 3/8 inch wide tread set
2 3/8 inch wide matched treads with an approximate 12mm pitch.
U-061-000
$259.00  $229.00
2 Ready to Ship!
USB to TTL Converter - Bare Board
Our USB to TTL converter provides two way serial communications signal conversion between the TTL (Transistor Transistor Logic) input/output (from an OOPic or other PIC) to and from a personal computer via virtual COM port.
MCU-036-000
$11.50  $10.29
138 Ready to Ship!
2.4GHz Wireless Camera Only
This is a wireless Multi-Channel 2.4 GHz camera with built in transmitter. This is the camera only. The package a wireless camera, transformer, battery clip, and mini stand.
WC-046-000
$32.95  $24.99
11 Ready to Ship!
HiTec Aggressor CRX 75MHz 3 FM w/ DCS Rx and Servo
This is the 75MHz HiTec Aggressor CRX 3 Channel FM Computer Radio System. This standard version includes a HS-3xx Ball Bearing Servo, DCX 3ch Receiver and Switch harness.
TE-077-000
$184.50  $89.90
2 Ready to Ship!
SuperDroid Robots Trekker T-Shirt
Get you very own SuperDroid Robots T-Shirt. These are high grade cotton shirts printed on the front and back.
TM-002-000
$10.00  $5.00
27 Ready to Ship!
D-Link 108G  Wireless Notebook Adapter
Now the popular D-Link Xtreme G Wireless Notebook Adapter just got faster, while maintaining adherence to the IEEE 802.11g standard.
DL-003-000
$59.00  $4.99
1 Ready to Ship!
Magnevation Joystick Adaptor Cable
This cable is used to connect a standard PC style joystick to the Magnevation Dual PWM Driver board.
TE-013-000
$12.00  $1.49
2 Ready to Ship!
Magnevation Network Cable with Termination
This cable is used to connect the OOPic to another OOPic through the networked I2C bus. The termination cable has built in pull up terminators so that the user does not have to add a terminator to the bus.
MCU-022-001
$12.00  $0.99
18 Ready to Ship!
Trekker Wheel Encoder Package (4 Sensors)
This is the same as TS-036-002 with two extra sensors that can be used to look at the floor for white/black contrast of holes. This kit will only plug into V2.x OOPic II Expansion Boards.
TS-036-004
$29.95  $21.95
1 Ready to Ship!
Trekker Soccer Ball Catching Sensor and Brackets
This kit includes two brackets that mount to the Trekker Bumper and act as a catcher for balls. It includes a sensor and the connectors to determine if the Trekker has caught the ball. This kit will only plug into V2.x OOPic II Expansion Boards.
TS-022-000
$19.95  $14.95
4 Ready to Ship!
OOPic-R Expansion Card
No other Robot kit offers this - an interface card to allow plug and play with your Robot! This package includes a custom circuit board with the entire component and the hardware to interface with an OOPic-R MCU. Includes CD
TE-006-000
$48.00  $24.00
5 Ready to Ship!
Trekker OOPic-R Electronics Kit
This package is a breadboard that mounts directly to the SuperDroid Trekker Chassis or prototyping along with the basic electronic components to interface the Trekker to the OOPic-R. Includes CD
TE-005-000
$11.95  $6.95
2 Ready to Ship!
Trekker OOPIC II Electronics Kit
This package is a breadboard that mounts directly to the SuperDroid Trekker Chassis or prototyping along with the basic electronic components to interface the Trekker to the OOPic-II . Includes CD
TE-002-000
$25.00  $12.00
3 Ready to Ship!
OOPic II Expansion Card
No other Robot kit offers this - an interface card to allow plug and play with your Robot! This package includes a custom circuit board with the entire component and the hardware to interface with an OOPic II/III MCU. Includes CD
TE-001-000
$54.00  $26.00
3 Ready to Ship!
Specials from SuperDroid Robots.  Bargans, deals, robots, robot kits, robot parts.
Custom Robot Request

We specialize in designing and fabricating custom robots and other electro-mechanical devices.

You can also get a quote for custom mechanical, software, and electronics engineering services. We can also do your custom CNC work, general fabrication, and welding.

1-919-557-9162

Need an easier way to pay? PayPal now offers easier payment methods!

New Tactical Robot Website!

Looking for our Tactical Robots? We've created a new, dedicated website to better serve our customers. Please click the image below to visit the new SDRTactical.com!

New Items
NEW Prebuilt MLT-JR Tracked Development Robot Platform with Arduino
TP-500-061

This is a prebuilt MLT-JR tracked robot platform and is equipped with 12V 32mm motors, motor controller, and a authentic Arduino for autonomous control.

$831.79  $799.00
1 Ready to Ship!
Welded Aluminum Mecanum Vectoring Robot Chassis - IG32 SB
TD-139-004

This is a rugged chassis made of 1/8" thick aluminum that is cut to the width required by the 4" mecanum wheels. The aluminum is cut with our CNC plasma cutter for and exact fit-up and welded. The chassis accepts outboard bearings to take the wheel loads.

$219.00
Built to Order
1-3 days
Powered by SuperDroid Robots, Inc