High Power Polymer Li-Ion Module 22.2V 10Ah
 
Category
LiFePO4 and Li-ion Batteries provide the best weight and size to power ratio, but are more expensive than most other batteries.
Category List
High Power Polymer Li-Ion Module 22.2V 10Ah
Item Details
High Power Polymer Li-Ion Module 22.2V 10Ah
Item Name:
High Power Polymer Li-Ion Module 22.2V 10Ah
Item #:
TE-119-222
Your Price:
$449.90
In Stock!
Quantity:

Packing

  • 22.2 V 10 Ah pack is made by 6 pcs High power Polymer Li-Ion cell of 3.7V 10000mAh batteries with 50Amp drain capability
  • Wrapped by heavy duty heat shrink tube
  • Built in Protection Circuit Module for 6 Cells
Voltage
  • 22.2 v (working), 25.2 V ( peak), 15V ( cut-off)
Capacity
  • 10000 mAh (222 wh)
Pre-wired
  • One PCM with balance function is installed in the battery pack to balance charging and protect battery module from
    • Overcharge beyond 25.2V
    • Over-discharge below 15V
    • over drained beyond 45A
    • Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
  • Charging terminal: 6" 20 AWG with tamiya male connector.
  • Discharging terminal: 6" 12 AWG open end wire.
Max. Discharging Rate
  • 40 Amp limited by PCM
Dimensions (LxWxH)
  • 160mm (6.3") x 76mm (3.0") x 72mm (2.8")
Weight
  • 3.3lb (1496g)
Smart Tips
  • Please use smart charger below.
  • Must plug the charger and the connector adaptor via only charge terminal with correct polarity.
  • SuperDroidRobots.com will not be responsible for any damage caused by misusing. Read our Terms.
Warning
  • Please note this battery is for R&D use only and NOT for individual customers. We are not responsible for any damages or losses caused by using battery pack.
  • Please never discharge the battery pack beyond its Max. rating
  • Must read before place an order. We reserve the right to not sell the battery to any one if we feel they cannot handle Li-Ion battery safely
  • For safety warning please see the link here
Warranty
  • Limited Warranty: Repair or exchange only within 15 days.
 
22.2 V 10 Ah pack is made by 6 pcs High power Polymer Li-Ion cell of 3.7V 10000mAh batteries with 50Amp drain capability
Related Items
K2 25.6V LiFePO4 Battery Pack 9.6Ahr
TE-142-024

This is a a light weight LiFePO4 battery pack. It's half the weight of a comperable lead acid battery and will yield 30% more power!

$339.00
In Stock!

High Power Polymer Li-Ion Module 11.1V 5Ah
TE-125-111

11.1V 5.0Ah polymer Li-Ion battery pack is made of 3 pcs polymer Li-Ion cells (5000mAh) with prewired PCB & Polyswitch. Rated for a 7Amp Discharge Rate.

$79.48
In Stock!

New Items
Etrovision EV5131 Video Decoder
WC-062-000

The Etrovision Video Decoder is the easiest way to control your IP surveillance system. No longer must you rely on a PC as a video decoder.

$209.00
In Stock!
IG32 Mecanum Vectoring Robot Chassis
TD-106-004

This is a CNC cut 4WD aluminum base intended for our IG32 gear motors. It is for direct driving using Nexus omni or mecanum wheels.

$47.00
In Stock!
TP-140-042

This 4WD wheeled enclsoed robot is equipped with 42mm motors, a motor controller, 10 inch tires, and Spektrum remote control. By default, the robot handles up to 20lbs of additional payload and travels 320 ft/min.

$1,149.58
In Stock!
Powered by SuperDroid Robots, Inc