9V Regulator Board Kit

Description

This is a regulator board. It tas a terminal strip with a common ground, input, and 9VDC output. Includes 1A fuse, filtering capacitors, and power status LED. Input voltage should be around 10.5VDC-24VDC. These work great as a regulator for our wireless cameras. The board is spaced out on 0.1" or more grid that is easy to solder with no surface mount components. The board is about 1.25" square.

An optional heat sink (as pictured) can be purchased with it too, which is recommended if the load is going to be much greater than 500mA. The heat sink option includes a machine screw and nut to fasten the heat sink. If desired you can get better heat transfer with heat sink compound.

Documentation and Support

Item Options - Customize

Select an option by clicking on its button. To see more details about the option select the option name, selecting 'more details' in the pop-up will take you to that options product page. Default selections (if any) are pre- selected for you. Click on the update button below to see the price with your selected options.

*If you are going to draw more than 500mA you should use a heat sink.

No Heat sink

Heat Sink for Regulator Board (Add $2.60)

*Any surface mount components are pre-assembled to the board. ONLY the through components are unassembled by default. If you wish we can assemble the through hole components too.

Assembled (Add $6.50)

Item Price

Adjusted Price

$8.32

Support Links

General Support

TE-174-003

The compact (0.4″ × 0.5″) D24V6F3 switching step-down (or buck) voltage regulator takes an input voltage between 4.8 V and 42 V and efficiently reduces it to 3.3 V while allowing for a maximum output current of 600 mA.

$5.95

Not Available

Panel Mount 2.1mm x 5.5mm Power Jack

TE-209-000

Panel Mount for 2.1mm x 5.5mm barrel plug power jack. Assembly has a diameter of 11.60mm and has a depth of 13.00mm. Perfect for providing a power interface for enclosures.

$1.69

Not Available

New Items

NEW Prebuilt - MLT-42-F Tracked Platform

TP-500-372

A ready to ship prebuilt tracked robot. It features IG42 122RPM Gear motors. Controller, battery, and charger included.

$1,727.00

Not Available

4 Inch Omni Wheel and Aluminum Hub Set

TD-312-000

This is a set containing a 4 Inch Omni Wheel and a 6mm Nexus Robot Aluminum Wheel Hub. It is intended for use with our Triangular Omni Wheel Robot. The aluminum hub couples directly to the 6mm IG32 motor shaft.

$40.80

Built to Order
0-1 Days

Description

Documentation and Support

*If you are going to draw more than 500mA you should use a heat sink.

*Any surface mount components are pre-assembled to the board. ONLY the through components are unassembled by default. If you wish we can assemble the through hole components too.

Robots for Sale

Related Services

Help

Social Networking