This Custom RP2W Robot is completely assembled, tested, and ready to ship. Besides the robot, we also ship the following for the remote operator to use: a USB head set, USB Gamepad controller, Custom Program, and IP camera.

The RP2W (Remote Presence 2-Way) is a remote presence robot which allows professionals in different geographical locations to teleconference and establish a remote presence via a mobile robot. Real-time video allows for detailed viewing and audio of the surroundings. The robot allows mobility within the workplace. The robot, made by SuperDroid Robots Inc. has two-way video, two way-audio, non-contact sensors, and battery voltage. All of this is accomplished using wireless technology. The robot is controlled from a remote location using a personal computer and a gamepad controller.

The RP2W has a stable 2WD platform that can traverse most indoor surfaces including carpet. The left and right motors are independently controlled allowing pivot turns and full maneuverability. The motors are controlled by the remote user with a gamepad controller that utilizes SuperDroid Robots RP2W custom robot control software. The other joystick of the gamepad controls the camera. The camera has a full 360+ degree pan and 110+ degree tilt. Using the gamepad D-Pad the user can trim (incrementally position) the camera or use the joystick and move the camera rapidly to see throughout the room. The design allows the camera to look straight down so it can view the monitor and the base of the robot.

This robot is equipped with non contact infrared sensors at the base of the robot to detect low-lying obstacles. The supplied RP2W program will detect and obstruction and stop the robot from driving. The user can use the camera pan and tilt and look down at the base of the robot to confirm the obstruction or over-ride the sensors on a false indication.

The robot is controlled through the office/remote location using a WiFi 802.11b/g network. The office router then allows the remote user to port through to the robot from the internet. SuperDroid Robots RP2W control software establishes a connection to the robot so the remote user can command and control the robot and view the camera. If for any reason the remote connection is interrupted or broken the robot will detect the lost connection and safely stop driving. The robot will automatically resume when the connection is re-established.

The aluminum robot chassis is welded construction. The robot wheels and axles are supported by dual sealed ball bearings yielding very smooth operation with minimal maintenance. The robot is power with large sealed gel cell batteries and can be sized to give up to 8+ hours of operation. The robot will run close to 16 hours with the camera, speakers, and monitor on (with minimal driving). The robot has an onboard automatic charger, so during long meetings, idle time, or after hours it can be plugged into the wall and charged without the need to turn it off.

For information on setting up the remote telepresense robot and a diagram illustrating the connections of the robot, internet, and remote user follow this link.

See the following RP2W Support Page for more information.

The following items are included with the robot:

• The assembled robot as pictured.
• 4 Sealed 12V Batteries built into the robot
• Built in battery charger (AC plug plugs into the side of the robot)
• 14" color LCD with WiFi Display
• WiFi RS232 data system (for control and monitoring of the robot)
• Custom Control Board for the following:
  • Remote User controls the following using the RP2W software:
    • Drives motors
    • Power Relay for speakers and monitor
    • Power Relay for Pan and Tilt
    • Over-ride of remote sensors
  • Remote User Monitors the following using the RP2W software:
    • Monitors Battery Voltage
    • Monitors Control Power Voltage
    • Monitors Sensors (will automatically stop the robot if obstruction detected - can be overridden)
• Complete Assembly including all wiring and testing
• Shipping Crate
• Support Setting up the robot

The other additional items are included for the remote user:

• USB headset with microphone
• USB gamepad controller
• Installation CD with Remote SDR custom RP2W software
• Support Setting up the robot

The robot weighs 81lbs and stands about 4.5 feet tall.

This robot is very heavy and will include an enclosed custom wooden shipping crate. Please allow 1-5 days for us to crate/package this robot.