Smart Charger for 4.8V - 10.8V NiMH and NiCad
Home Home
Shop Shop
Contact Contact
Support Support
Robot Kits Robot Kits
Custom Engineering Custom Engineering
Educational Educational
Military/Law Enforcement Military/Law Enforcement

Ordering and Support: (919) 557-9162
Toll Free: 1-866-SD-Robots (866-737-6268)
 Store Search 
  or Goto 
 Website Search 
 Order Status 
 Shopping Cart 
Category  Category
Electrical & Controls \ Chargers and Transformers
... to see category items, click here
Battery chargers and Transformers
Related Items  Related Items
AstroFlight 110 Deluxe Charger/Discharger AstroFlight 110 Deluxe Charger/Discharger

The Astro 110D Digital Peak Charger/Discharger can charge any 1 to 24 cell Nicad or Nimh pack, from the tiny 50 mahr cells to giant 9,000 mahr cells. The 110 can also discharge these packs and measure their milliamp-hour capacity. Works from 12vdc.   
More Detail

Item# TE-073-000
$129.95
In Stock
Smart Charger Extra Temperature Sensor Smart Charger Extra Temperature Sensor

Extra Temperature Sensor for the Smart Chargers.  
More Detail

Item# TE-107-000
$3.99
In Stock
Smart Charger for 19.2V - 24V NiMH and NiCad Smart Charger for 19.2V - 24V NiMH and NiCad

Universal Smart Charger (1.5A) with Temperature sensor for 19.2V-24V NiMH/ NiCd Battery Packs   
More Detail

Item# TE-106-024
$29.95
In Stock
Smart Charger for 9.6V - 18V NiMH and NiCad Smart Charger for 9.6V - 18V NiMH and NiCad

Multi-Current Smart Charger (0.9 - 1.8A) For any 9.6V - 18V NiMH / NiCd Battery Packs   
More Detail

Item# TE-106-018
$28.95
In Stock
 
Item Detail  Item Detail
Name:
Smart Charger for 4.8V - 10.8V NiMH and NiCad
Item#:
TE-106-010
Price/ea.
 $26.95
In Stock
 QTY: 
Smart Charger for 4.8V - 10.8V NiMH and NiCad Features:
  • Universal Fast and Smart Charger is designed for charging any NiMH / NiCd Battery Pack from 4.8V - 10.8V , e.g. 4 to 9 cells pack
  • One charger for all types of battery packs of RC airplane, RC car and Airsoft .
  • LED flashing red-green-red before charging in order to test the IC of the charger if ready to use.
  • It is a very smart charger. Just plug it in and wait for the battery to get charged. Red LED indicating charging, and Green LED means fully charged
  • Short circuit protection: No output voltage from the charger if the battery is not connected.
  • 120-240V AC input for worldwide use.
  • First smart charger that has UL safety approved on the market
Specifications & Functions:
  • Detects battery pack voltage (from 4.8 - 10.8V) and chooses proper charging voltage automatically
  • Cuts off power automatically by negative delta V IC when battery pack is fully charged.
  • Built in IC Protecting battery from over current, short circuit & reverse polarity.
Charging Current:
  • Two current levels, 2A and 1 A, are selectable by a switch for both high capacity ( > 2100mAh) and low capacity battery pack ( < 2000mAh)
  • For battery pack between 1000 mahr and 2000 mahr, please use the low level switch -- charging rate: 1 A
  • For battery pack over 2000 mAhr, please use the high level switch -- charging rate: 2A
Charging time:
  • The smart charger will cut-off power automatically when battery is full. However, Charging time can be estimated as the follow:
  • Time ( Hrs ) = Battery capacity (Ah) / Charging current ( 1A or 2 A )
Dimension:
  • 1.5"H X 2.5"W X 5.5"L
Weight:
  • 0.6 lb.
Accessories included:
  • One standard female Tamiya connector with 12" length cable is installed with the charger.
  • One 5' cable with female connector and two clips which allow you to connect a battery pack to the smart charger.
  • one 4' cable with PC connector is included to connect charger to AC power.
Certificates and Manual: Precautions:
  • Don't use the charger to charge battery pack with capacity less than 1000 mAh
  • If you have question on what current setting to use, please check the battery specification to find out what is the maximum charging current before selecting the charging current.
  • The charger is designed for indoor use only.
  • The charger should be horizontally positioned and works in well ventilated condition, avoid moisture and keep it away from flammable explosive goods.
  • Ambient temperature shall not be more than 40 degree C when using the charger
  • Remove the AC power before connect or disconnect the charger with batteries.
  • Don't try to disassemble the charger
 
 Home  Shop  Contact  Support  Robot Kits  Custom Engineering  Educational  Military/Law Enforcement

Copyright � 2001-2006 SuperDroid Robots Inc.
SuperDroid Robots Inc. is incorporated in Wake County, NC USA
SuperDroid Robots also does business as Team Half-Life
SuperDroid Robots is a registered trademark of Team Half-Life.
Prior to purchasing review our Terms