This Charger is designed for charging a 24V lead acid battery with 4A current. The charger will work with 2 12V batteries run in series.
This is a Brand New 24V 4A three-stage smart charger with a standard XLR three pin output connector for 24V Lead-Acid and GEL rechargeable batteries, which are widely used in electric scooters, power chairs, electric bikes, wheelchairs,etc.
Three stage chargers will automatically monitor battery voltage, adjust output voltage, and automatically shut off when batteries are fully charged. Won't damage your batteries.
Four Protection design: 1,Short circuit protection; 2,Battery polarity error protection; 3, Over current protection; 4,Over voltage protection.
Compatibility List: ActiveCare, Bladez XTR, Currie, Drive Cirrus Plus EC Folding Power Chair, Golden Technologies, GT, IZIP, Jazzy, LASHOUT, Mongoose, Pacesaver, Pride, Rascal (600 series excluded), Schwinn, Shoprider.
What if my scooter/wheelchair is not on the list? Please check your battery connector. As long as it is round with three small holes (standard XLR connector), this charger will work.
Features and Specifications:
- Scooter battery charger 24V 4A XLR
- Input:100-240V, 50-60Hz. You can use it everywhere you go, even another country.
- Output: 24V 4A, Connector: 3-prong XLR (male) plug.
- Three Stage Charger, won't over charge your batteries. Better than any single and two stage chargers.
- Standard output XLR three pin male connector.
- Completely automatic.