This item is an aggressive 4" wide black material. The inside of the tread is reinforced by nylon web with a dark reddish color. The overall tread thickness is about 0.33" with the knobs, the tread without the knobs is about 0.15" thick. The knobs/ridges are spaced out 1 per inch and just a little less than 2" wide. On the 4" wide tread they are staggered. The tread is fairly flexible and should work well down to about a 4" wheel diameter. The tread does not have internal cleats, etc. The 4" wide tread weighs about 0.38lbs/foot.
This is for a fixed length of 24 inches (2.0 feet) total belt length. We will splice the tread for you. There will only be one splice per tread (ie we won't join a bunch of short sections together to make your length). See the picture in the gallery of a typical splice. The splice can be disassembled by pulling the pin out of it. Use the options below to specify any additional length of tread you want added in feet and inches to match your design. (i.e. if you want a 3 foot 8 inch tread loop add 1 foot to the first option and 8 inches to the 2nd option). The tread will be cut to size within 1/4 of an inch (we have to space it around the knobs, so we can't get too precise). Your tread design should allow for this error and stretching of the tread over time using a tensioning device.
This is only one tread, if you want a matching set, just change the quantity to 2.
This is a custom item, please allow 1-4 days for us to cut the treads and splice it together.
**Since these treads are built to order, no returns can be accepted.**
This is a MLT-42-F tracked robot platform and is equipped with flipper arms, 42mm motors, a motor controller, and Spektrum remote control. This rugged robot platform the treaded robot handles up to 15lbs of additional payload and travels 200ft/min.
This is a small tracked robot equipped with 42mm motors, a motor controller, and Spektrum remote control. Don't let its size fool you. This is a rugged little robot.