This custom 6WD was designed and built for a customer to haul a tricked out cooler (ice chest with sink, stereo, neon lights, etc.). The robot is powered by 2 IG90 gear motors (one per side) and is designed to haul 150lbs. The robot itself is about 250lbs. The video shows it can also be […]
SuperDroid Robots just went to NI week in Austin Texas. During the event SuperDroid Robots released the SD6 Industrial Autonomous Commercial Robot which features the National Instruments CompactRIO and Labview. Below are some short video clips of the SD6 running around. At the end of the video the SD6 drives around on end using an […]
The Nevada Discovery Museum ROV Exhibit Completed. This project included making a display case that will fit into the museum and then a primary ROV and backup ROV that are used to shovel media from one point to the dump location. The project included building the display, ROV and control along with programming the ROV, […]
This custom robot is being built to explore abondoned mine tunnels. The tunnels may be flooded with water so the motors are in waterproof housing. The electronics will get placed in waterproof housings too at a later date. Items will be added such as IP control, camera systems, and a fiber optic spool. SuperDroid Robots […]
Here is one of our custom robot chassis being put to use in a upcoming movie. http://novaautomatics.com/headsome_post.html
SuperDroid Robots Custom Tracked Robot - RemCAT
This is a quick video showing the power of the RemCAT with “Bear Claw” tracks. The RemCAT weights ~200lbs and is being run at 50% speed in these videos. The RemCAT is a Custom Tracked Robot designed built by SuperDroid Robots for Energy Solutions.
We just finished the RemCAT for Energy Solutions. These are the 1st pictures and the video of the 1st test run. The robot is designed to be driven via a Tablet PC and record postion and radiation levels using 4 onboard radiation sensors. The robot also has encoders to tracking speed and distance. A 3-axis […]
This is a prototype of a production robot being built for National Instruments. The robot runs LabVIEW and has a cRIO in it. Other features included a wireless router, two front sonar sensors, Lidar, rear IR sensor, Tilt IP Camera. Encoders interfaced with the new RoboteQ SDC2130, and more. SuperDroid Robots Tracked Robot SD5 for […]