IG32 IG42-SB4-T, 4WD All Terrain Robot with Custom Length - DISCONTINUED

  • IG32 IG42-SB4-T, 4WD All Terrain Robot with Custom Length - DISCONTINUED
The gallery displays different options for this robot.

Available Options

One of the options below is for a chassis plate, made out of .125" Aluminum. This will make your robot kit complete. Please note that the chassis plate is bent on each end, which adds .125" onto each side, or .25" total. So, for a 21" tube, the chassis plate is 21.25" long.

This robot can be configured with encoders used for telemetry and/or speed control. They are very useful if you are planning on making your robot semi-autonomous. Our motors use hall-effect encoders.

For help selecting the encoder options, read this blog post:

For more information, check out these blog posts:

Contact us if you need help selecting options or need a custom configuration.

Delivery

  • This item is Discontinued.
  • Assembly will add approximately 1 week.
  • Need it faster? Contact us

Videos

This model has been discontinued and replaced with TP-047-042.

This is a base kit for a robot that you control the size of. Specify the length as explained below and build it to your desired width as explained below. This kit gives you all the options for a base robot kit. By default this is sold without the motor controller, batteries and electronics. They can be selected using the options below.

The kit includes custom sides that are 2" x 2" Aluminum tube with a 1/8" thick wall. We machine it to a custom length. Using two of these you can make your custom sized robot. The width of robot is up to you, it must be at least (the length the gear motors + 2" tube + 1/8" adaptor plate) x 2. A simple piece of plywood, aluminum, or acrylic can be used to tie the two sides together or the sides can be bolted onto your own robot chassis.

This kit can support multiple types of wheels which are listed below

The tube structure uses the bearings in the above linked wheel kits to support the axle. The other side of the axle is supported by the motor. This provides a much stronger attachment for the wheels and the load is put on a heavy duty bearings and tube instead the motor. Direct coupling a wheel to the motor will just ruin a motor quickly.

Below you can specify the center to center length of the side. This will be the distance from one bearing/axle to the next. Specify the center to center length of the axles in inches. Total length of side will be an additional 3 inches. (i.e. there is 1.5" of tube past each axle center. The maximum center to center is 32.5 inches, the minimum is 8 inches. All other options are included below as a menu to build your custom robot. With the batteries, we do not recommend the 2200mAhr batteries unless it is for a very light duty robot with IG32 gear motors.

  • Standard size: 18" center to center (21" tube length) x 14.75" wide
  • Custom size ranges: 8"-32.5" wheel center to center (11.25"-36.75" tube length) x 13"-30" wide

IG32 IG42-SB4-T, 4WD All Terrain Robot with Custom Length - DISCONTINUED

This product is unavailable.

Contact us if you have any questions.