Features and Specifications

  • Dimensions: 2.5" x 2.5" x 4" long (.125" wall thickness)

Documentation

This item has been replaced with a newer model. Click here to go to the new model

This aluminum motor mount is designed to support any of our IG52 motors. Use with our IG52 motor mount plate, any of the following wheel and shaft sets:

  • ATR Wheel and Shaft Set Pair 12mm bore - 10 inch Traction Lug
  • ATR Wheel and Shaft Set Pair 12mm bore - 10 inch pneumatic
  • Mount two of these and a caster to a piece of plywood, aluminum, or acrylic for a simple and inexpensive 2WD robot.

    The tube structure uses the bearing linked above to support the axle. The other side of the axle is supported by the motor. This provides a much stronger attachment for the wheels and the load is put on a heavy duty bearings and tube instead the motor. Direct coupling a wheel to the motor will ruin a motor quickly.

    Includes the following hardware:

    • Qty. 4 #10-32 Machine Screws
    • Qty. 4 #10-32 Machine Screw Hex Nuts
    • Qty. 8 #10 Washers

    Motor Mount Tube - IG52 SB - DISCONTINUED

    • $18.00



    Related Products

    Motor Mount Tube - IG32 or IG42 SB

    Motor Mount Tube - IG32 or IG42 SB

    This aluminum motor mount is designed to support any of our IG32 motors or IG42 motors. Use with our..

    $12.00

    Motor Mount Plate - IG52

    Motor Mount Plate - IG52

    This is 1/8" thick aluminum plate designed to support our IG52 motors. Use M5x12 screws to mount the..

    $2.25