Documentation and Support

This is a regulator board. It tas a terminal strip with a common ground, input, and 6VDC output. Includes 1A fuse, filtering capacitors, and power status LED. Input voltage should be around 7.2VDC-24VDC.

An optional heat sink (as pictured) can be purchased with it too, which is recommended if the load is going to be much greater than 500mA. The heat sink option includes a machine screw and nut to fasten the heat sink. If desired you can get better heat transfer with heat sink compound.

We use these in our ATRs to supply a regulated 6V supply from a 9.6V battery to our RC receivers/servos. The board is spaced out on 0.1" or more grid that is easy to solder with no surface mount components. The board is about 1.25" square.

6V Regulator Board Kit

  • $8.32



Available Options


Related Products

5V Regulator Board Kit

5V Regulator Board Kit

This is a regulator board. It tas a terminal strip with a common ground, input, and 5VDC output. Inc..

$8.32

Pololu 5V Step-Up/Step-Down Voltage Regulator

Pololu 5V Step-Up/Step-Down Voltage Regulator

The Pololu step-up/step-down voltage regulator S7V7F5 is a switching regulator (also called a switch..

$9.95

Pololu 5V Step-Up Voltage Regulator U3V12F5

Pololu 5V Step-Up Voltage Regulator U3V12F5

These boost (step-up) voltage regulators generate higher output voltages from input voltages as low ..

$7.95

Pololu 3.3V, 600mA Step-Down Voltage Regulator D24V6F3

Pololu 3.3V, 600mA Step-Down Voltage Regulator D24V6F3

These buck (step-down) voltage regulators generate lower output voltages from input voltages as high..

$5.95

Pololu 3.3V Step-Up Voltage Regulator NCP1402

Pololu 3.3V Step-Up Voltage Regulator NCP1402

These tiny boost (step-up) switching regulators are based on the NCP1402 boost regulator IC. Their s..

$4.95