Features and Specifications

These specifications are listed with the "rated" values (these are the values where the motor runs at peak efficiency). The motors can deliver considerably more than their rated values, refer to datasheet for more information.

  • 24VDC
  • Reduction Ratio: 1:12
  • Rated Torque: 11 kgf-cm
  • Rated Speed: 285 RPM
  • No Load Current: < 700mA
  • Dual Channel/Quadrature Encoder mounted to tail shaft of motor. See datasheet in image gallery. (Each channel requires a 1k pull up resitor to Vcc as shown on datasheet.) This pull up board can be used in-line, providing the required pull-ups to Vcc for channel A and channel B.
  • They weigh about 3.5 lbs each.

Recommendations

We recommend controlling the motors with one of our motor speed controllers. See our motor controller support page for more information. We also recommend you use our wiring kit to wire your motors. The hookup kit will help suppress the electronic noise generated from any DC motor. See our motor wiring support page for more information.

  • Brushed permanent magnet DC motor
  • Variable speed and reversible
  • Planetary Gear Box
  • Final drive stages are steel gears (not plastic or sintered metal)
  • Tested extensively on our All-Terrain-Robots
Need a chain drive? Check out our selection of Chains and Sprockets including our D-Shaft Sprockets made specifically for these motors.

IG52-04 24VDC 285 RPM Gear Motor with Encoder

  • Product Code: TD-045-285
  • Availability: Limit 12 per customer Contact us for higher quantities.
  • $146.95



Related Products

IG42 24VDC 240 RPM Gear Motor with Encoder

IG42 24VDC 240 RPM Gear Motor with Encoder

Brushed permanent magnet DC motor Variable speed and reversible Planetary Gear Box Final..

$59.95

IG52-04 24VDC 285 RPM Gear Motor

IG52-04 24VDC 285 RPM Gear Motor

Brushed permanent magnet DC motor Variable speed and reversible Planetary Gear Box Final..

$134.95

IG52-04 24VDC 136 RPM Gear Motor with Encoder

IG52-04 24VDC 136 RPM Gear Motor with Encoder

Brushed permanent magnet DC motor Variable speed and reversible Planetary Gear Box Final..

$149.95

IG52-04 24VDC 010 RPM Gear Motor with Encoder

IG52-04 24VDC 010 RPM Gear Motor with Encoder

Brushed permanent magnet DC motor Variable speed and reversible Planetary Gear Box Final..

$168.75

Dual LS7366R Quadrature Encoder Buffer

Dual LS7366R Quadrature Encoder Buffer

This is a breakout board based on LS7366R quadrature counter IC. The Dual LS7366R buffer board is de..

$45.68

IG52-04 24VDC 044 RPM Gear Motor with Encoder

IG52-04 24VDC 044 RPM Gear Motor with Encoder

Brushed permanent magnet DC motor Variable speed and reversible Planetary Gear Box Final..

$165.65

Single LS7366R Quadrature Encoder Buffer

Single LS7366R Quadrature Encoder Buffer

This is a breakout board based on LS7366R quadrature counter IC. The single LS7366R buffer board is ..

$28.65

Triple LS7366R Quadrature Encoder Buffer

Triple LS7366R Quadrature Encoder Buffer

This is a breakout board based on LS7366R quadrature counter IC. The Triple LS7366R buffer board is ..

$61.52

Quadruple LS7366R Quadrature Encoder Buffer

Quadruple LS7366R Quadrature Encoder Buffer

This is a breakout board based on LS7366R quadrature counter IC. The Quadruple LS7366R buffer board ..

$77.36

IG42 IG52 Encoder Connector

IG42 IG52 Encoder Connector

Connector for IG42 IG52 motors with encoders...

$0.59