Robot Chassis

This is our IG42 DB Heavy Duty Vectoring All-Terrain Robot Chassis. It is designed for our IG42 motors with 6 inch mecanum wheels.

This rugged enclosed frame is cut on our high definition CNC plasma table for an exact fit. It's made of 1/8" thick aluminum to accept our IG52 planetary gear motors.

This chassis plate is used with our IG32 and IG42 custom length robot platform. Mount the tubing frame to this plate and you have a sturdy chassis ready for assembly with room to mount batteries and electronics.

This chassis plate is used with our custom length robot platform. Mount the tubing frame to this plate and you have a sturdy chassis ready for assembly with room to mount batteries and electronics.

This is a 2" x 2" x 3" long Aluminum tube with a 1/8" thick wall designed to support one of our IG32 or IG42 motors.

This is our IG52 DB Heavy Duty Vectoring All-Terrain Robot Chassis. It is used for our IG52 motors with 8 inch mecanum wheels.

This is a rugged chassis made of 1/8" thick aluminum that is cut to the width required by the 4" mecanum wheels. The aluminum is cut with our CNC plasma cutter for and exact fit-up and welded. The chassis accepts outboard bearings to take the wheel loads.

This is a bottom cover that will fit on our ATR open chassis and protect the motors and electronics from debris, damaging objects when running off road, water spray, etc. It will fit most of our open chassis ATRs.

This is a rigid bumper that will mount on the front or back of most of our All Terrain Wheeled Robots. The bumper is made of bent aluminum providing a very rigid and sturdy bumper that protects the robot from driving up obstacles.

This is our Heavy Duty All-Terrain Robot Kit. Using the options you can add the features to customize it to your needs. It is used for our IG52 motors.

This is a top deck that will mount on most of our All Terrain Wheeled Robots. The upper deck is made of bent and welded aluminum providing a very rigid and sturdy upper deck.

This is a rugged enclosed chassis made of 1/8" thick aluminum to accept our IG42 motors. The aluminum is cut with our CNC plasma cutter for and exact fit-up and welded. The chassis accepts outboard bearings to take the wheel loads.

This is a CNC cut 4WD aluminum base intended for our IG32 gear motors. It is for direct driving using Nexus omni or mecanum wheels.

This is a CNC cut triangular base intended for our IG32 gear motors. It is for direct driving Nexus Omni Wheels and hubs.

The Pololu Zumo chassis is a small, tracked robot platform that is less than 10 cm on each side, allowing it to qualify for Mini Sumo competitions.

This is the chassis for our Enclosed Heavy Duty 4WD All Terrain Robot Kit. It is fully welded and ready to be added to the assembly of one of our kits.

This is our Heavy Duty All-Terrain Robot Kit. Using the options you can add the features to customize it to your needs.

The polycarbonate /acrylic deck is CNC cut to ensure exact match up with the lower deck. It includes 4" bolts and nuts for mounting the deck.

The polycarbonate /acrylic deck is CNC cut to ensure exact match up with the lower deck. It includes 4" bolts and nuts for mounting the deck.

The aluminum bases are laser cut to ensure exact match up of hole sizes etc for mounting parts on your ATR or Vectoring Robot. Formally part number TD-059-002.

This is a rugged chassis made of 1/8" thick aluminum to accept our IG42 motors. The aluminum is cut with our CNC plasma cutter for and exact fit-up and welded. The chassis accepts outboard bearings to take the wheel loads.

This is a rugged chassis made of 1/8" thick aluminum to accept our IG32 and IG32P gear motors. The aluminum is cut with our CNC plasma cutter for and exact fit-up and welded. The chassis accepts outboard bearings to take the wheel loads.

This is an acrylic cover that mounts on top of the compact ATR aluminum base.

This is a rugged aluminum chassis to accept our IG32 and IG32P gear motors. The aluminum is all CNC cut and CNC Beat for an exact fit-up.

This is a roll cage that can be mounted on your ATR frame.

The Tracked Vehicle Chassis traverses over objects in its path and rough terrain. Use this kit as a stand-alone or combine it with other accessories making a more complex machine with more capabilities

This is a kit that you assemble and learn about building 4WD transmissions. The kit includes the tires, chassis, gears and motor.

The bases are laser cut to ensure exact match up of hole sizes etc for mounting parts on your ATR or Vectoring Robot.

The bases are laser cut to ensure exact match up of hole sizes etc for mounting parts on your ATR or Vectoring Robot.

The bases are laser cut to ensure exact match up of hole sizes etc for mounting parts on your ATR or Vectoring Robot.

The aluminum bases are laser cut to ensure exact match up of hole sizes etc for mounting parts on your ATR or Vectoring Robot. Formally part number TD-059-001.