Connectors and Cables for your Robot or other Device

Slim Gender Changer DB9 Male to DB9 Female.

Slim Gender Changer DB9 Female to DB9 Female.

Slim Gender Changer DB9 Male to DB9 Male.

Turn your 9-pin serial device such as a modem into a USB device. 6-feet long and easy to install. With the included 25-pin serial adapter you can turn any 25-pin serial device into a USB device too.

Premium Video Cable. 15 Foot Long. Two RCA Male Connectors as shown in image. 75 Ohm.

USB Cable. Cable to connect a host or hub to a device or hub. This cable has been tested to the standard of the USB Integrators forum for version 2.0 of the USB specification.

RS232 10 foot extension cable. DB9 Male to Female. 28AWG.

Wireless Serial Hookup Kit

This kit includes a Power Switch, switch bracket, fuse blocks, terminal block, wires and more to wire the power to your 2WD Robot Kit

This kit includes fuse holders, fuses, wire, switches and more to wire the power to your Enclosed Heavy Duty ATR

RS232 DB9 Male to DB9 Male Null Modem Adapter.

RS232 6 foot extension cable. DB9 Male to Female. 28AWG.

9V Battery Snap with 12" Leads

This 8-Position Dual-Row Barrier Strip lets you access wiring without disturbing the circuit. Barriers help prevent short circuits. For hobby projects and Robot wiring. This item is replaced with TE-275-008 and TE-085-008.

Fast Ethernet and Gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. (Formally Part Number TE-080-010)

Fast Ethernet and Gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. (Formally Part Number TE-080-007)

Fast Ethernet and Gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. (Formally Part Number TE-080-002)

Fast Ethernet and Gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. (Formally part number TE-080-001)

USB Cable. Cable to connect a host or hub to a device or hub. This cable has been tested to the standard of the USB Integrators forum for version 2.0 of the USB specification.

This is a MALE RS232 to TTL signal serial converter cable. The type I cable converts a serial signal to TTL with connections for Tx, Rx, +3V/5V and ground. The TTL connector is a 4-pin Friction Lock with a 0.100" pitch.

This is a 2.1mm x 5.5mm barrel plug with 6ft of 18 gauge wire. This will plug into our camera receivers and some of our cameras.

This is a 2.1mm x 5.5mm barrel plug with 6ft of wire. This will plug into our camera receivers and some of our cameras.

These will adapt your RCA plugs into BNC. We sell them in sets of 5.

This kit provides you with the connectors/receptacles, crimp pins and wire to interface 2 or our PWM motor controllers with microcontroller with standard pins, such as the OOPic-R or OOPic II/II+.

This kit provides you with the connectors/receptacles, crimp pins and wire to interface 2 or our PWM motor controllers with our RC Interface Controller Board.

This item includes assorted Friction Lock Headers and a 36 pin header, that can be cut to any variation of 36. The 36-Pin Header has extra long ends for stabbing into bread boards.

This item includes 5 4-Pin Friction Lock Headers. These are can be used with Type 1 and Type 3 RS232 to TTL Cables

This is a 9V battery clip typically used for our wireless cameras.

This is a 9V battery clip typically used for our wireless cameras.   The ID is 2.1mm, the OD is 5.5mm.  Center positive.

This is a Y connector. It has a male plug on one end with female pins, then Ys out to two female plugs with male pins. Perfect for having your RC receiver power/control two servos or motor speed controllers from one channel.

This is a 18” 3-pin extension cable for extending your servo wires, etc. It has a female plug with male pins on one side, and male plug with female pins on the other end. Made with quality stranded 3-color wire.

This is a 6” 3-pin extension cable for extending your servo wires, etc. It has a female plug with male pins on one side, and male plug with female pins on the other end. Made with quality stranded 3-color wire.

This is a two piece set. One piece is a 12” 2-pin lead that has a male plug and female pins on one end and nothing on the other end. The other piece is a 12” 2-pin lead that has a female plug and male pins on one end and nothing on the other end.

This is a 12” 3-pin lead that has a female plug and male pins on one end and nothing on the other end. Made with quality stranded 3-color wire.

This is a 12” 3-pin lead that has a male plug and female pins on one end and nothing on the other end. Made with quality stranded 3-color wire. Perfect for connecting your RC receiver to a motor speed controller.

This is a 40 pin ribbon cable with two 2x20 0.1 inch female spaced headers on each end. It is 6 inches long.

This is a single ended 40 pin Ribbon cable with crimps. The cable can be used to connect the OOPic or Magnevation PWM to other devices.

Assorted C-Grid receptacles and crimps

30A connectors for the batteries or whatever. Anderson Powerpole Connectors.

15A connectors for the batteries or whatever. Anderson Powerpole Connectors.

This kit includes fuse holders, fuses, wire, switches and more to wire the power to your ATR or vectoring robot kit

This kit provide shielded hookup wire along with capacitors, ferrite rings, and heat shrink

USB Cable. Cable to connect a host or hub to a device or hub. This cable has been tested to the standard of the USB Integrators forum for version 2.0 of the USB specification.

Female RS232 to TTL serial converter serial cable. The Type III cable converts a serial signal to TTL with connections for Tx, Rx, +3V/+5V, CTS and RTS. The TTL connectors are a 4-pin Friction Lock and a 2-pin connector. Replaces MCU-016-372

Female RS232 to TTL serial converter serial cable. The Type II cable converts a serial signal to TTL with cconnections for Tx, Rx, +3V/+5V and ground. The TTL connectors are two 2-pin connectors with one for power and one for signal. Replaces MCU-016-272

This is a Female RS232 to TTL serial converter serial cable. The Type I cable converts a serial signal to TTL with connections for Tx, Rx, +3V/+5V and ground. The TTL connector is a 4-pin Fritcion Lock with a 0.100" pitch. This item replaces MCU-016-172

This is 2 3-pin connectors/receptacles. Crimping terminals are also included.

This is an assortment of Molex friction lock connectors/receptacles. Crimping terminals are also included.

This is an 6 inch long Ribbon Cable with 5 conductors and female connectors on each end.

This is an 8 inch long Ribbon Cable with 3 conductors and female connectors on each end.