SuperDroid Robots
Robots, Parts, & Custom Solutions
Request A Quote
##GOOGLEPLUS##
##PINTEREST##
Category List
Best Sellers
Our most popular items!
ATR and Vectoring Robot Hardware Kit
TD-021-000

This is a bundle of hardware used to mount OOPics, MD22s, Magnevation's, etc to the ATR and vectoring robots.

$8.95
302 Ready to Ship!
ATR Shaft 6mm Bore for 6 inch Tire
TD-170-006

This is a single axle with a hub that mounts to our 6 inch tires. The end opposite the hub is bored to fit a 6mm shaft. It is intended to be direct driven by our IG32 motors. The hub is welded to a steel 1/2" diameter shaft.

$16.76
Built to Order
1-3 days
SuperDroid Robots Current Sensors
Category
Electrical/Controls  >  Sensors  >  Current Sensors
SuperDroid Robots

Current Sensors

An assortment of unidirectional and bidirectional Hall effect-based current sensors. They offer a very low-resistance current path and electrical isolation between the current source and the measuring circuit. You can use these sensors to monitor your motor current, detect current spikes, or even to make inexpensive current probes for your oscilloscope.

Category Items
Sort By:  View: 

 Hide Out of Stock Items: 

ACS709 Current Sensor Carrier -75A to 75A
This board is a simple carrier of Allegro’s ±75A ACS709 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.1 mΩ) current path and electrical isolation up to 2.1 kV RMS.
TS-052-075
$9.95
25 Ready to Ship!
Pololu ACS714 Current Sensor Carrier -30 to 30A
This board is a simple carrier of Allegro’s ±30A ACS714 Hall effect based linear current sensor, which offers a low-resistance (~1.2 mO) current path and electrical isolation up to 2.1 kV RMS.
TS-052-030
$8.95
24 Ready to Ship!
Pololu ACS714 Current Sensor Carrier -5 to 5A
This board is a simple carrier of Allegro’s ±5A ACS714 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mO) current path and electrical isolation up to 2.1 kV RMS.
TS-052-005
$9.95
48 Ready to Ship!
Pololu ACS715 Current Sensor Carrier 0 to 30A
This board is a simple carrier of Allegro’s 30A ACS715 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mO) current path and electrical isolation up to 2.1 kV RMS.
TS-048-030
$9.95
29 Ready to Ship!
An assortment of unidirectional and bidirectional Hall effect-based current sensors. They offer a very low-resistance current path and electrical isolation between the current source and the measuring circuit.
Support Links
News and Updates
New Items
ATR Heavy Duty IG52 DB Wheel and Shaft Set Pair - 10 inch pneumatic
TD-274-000

This is a pair of 10" wheels and shafts. The shafts are machined steel with a welded hub. They are for our Heavy Duty and Enclosed Heavy Duty ATRs. These will not work for our Standard ATRs.

$105.90
Built to Order
1-3 days
RoboteQ MGS1600GY Magnetic Guide Sensor
TS-072-GY

The MGS1600GY is a sensor capable of detecting and reporting the position of a magnetic field (typically magnetic tape on the floor) along its horizontal axis. Includes a built in Gyro. Replaces MGS1600 TS-072-000

$445.00
5 Ready to Ship!
Powered by SuperDroid Robots, Inc