Headers, Connectors, and Jumper Wire

Molex JST-PA Secure lock connector set with 0.100" pitch. This set features (5) 2-pin headers, (5) housings, and (15) 22-AWG crimps.

Panel mount jack for 2.1mm x 5.5mm barrel connector. Replaces TE-209-000.

This is a 2.5mm x 5.5mm right angle barrel plug with 6ft of 18 gauge wire. This will plug into our camera receivers and some of our cameras.

45A connectors for the batteries or whatever. Anderson Powerpole Connectors.

This is a 2.1mm x 5.5mm barrel plug with 6ft of 18 gauge wire. This will plug into our camera receivers and some of our cameras.

This is a 2.1mm x 5.5mm barrel plug with 6ft of wire. This will plug into our camera receivers and some of our cameras.

This is a 1.35mm x 5.5mm barrel plug with 6ft of wire. This will plug into our camera receivers and some of our cameras.

This is a 2.1mm x 5.5mm barrel plug with 6ft of wire. This will plug into our camera receivers and some of our cameras.

This is a 2.5mm x 5.5mm barrel plug with 6ft of wire. This will plug into our camera receivers and some of our cameras.

DB15M Connector with Solder Cup Termination

Seal one of our low profile (RJ 45 Ethernet) waterproofable A, plastic connectors with this item.

This RJ 45 (Ethernet) waterproof connector is sealed and ready to be installed into your case, controller, brief, tote, detonator, or anything else you might be installing it on.

This connector kit will allow you to turn your existing RJ45(Ethernet) connector into a waterproof, rugged connector, that can seal to IP68 when connected to one of our female panel connectors.

Hook-up cable for LIDAR-Lite V3 Laser Rangefinder. Can be used hookup the LIDAR Lite V3 Range finder or for multiple projects.

This is a molex connector used for encoder input in Roboteq XDC2460, MDC2460, MDC2230.

5mm screw terminal block, 3 position, PCB mount

5mm screw terminal block, 2 position, PCB mount

This 8-position jumper can connect up to 8 terminals on barrier strips and can be cut for fewer than 8 positions.

This 8-Position dual-row barrier strip lets you access wiring without disturbing the circuit. Barriers help prevent short circuits. For hobby projects and robot wiring.

This 6-Position Dual-Row Barrier Strip lets you access wiring without disturbing the circuit. Barriers help prevent short circuits. For hobby projects and Robot wiring.

This 4-Position Dual-Row Barrier Strip lets you access wiring without disturbing the circuit. Barriers help prevent short circuits. For hobby projects and Robot wiring.

These are assorted headers that are great for many projects. They are spaced with the standard 2.54mm or 0.1". (5) 2, 3, and 4 pin headers. (3) 5 pin headers, and (2) 10 pin headers.

This authentic Arduino pair of 2 pin Female/Male header strips is very useful for connecting Arduino board extensions.

This authentic Arduino pair of 4 pin Female/Male header strips is very useful for connecting Arduino board extensions.

This is a 2x18 shield header for the Arduino. 36 pins in total. For Arduino Mega. Very useful for connecting Arduino shields.

This prototype board measures 5cm by 7cm. The 24 lettered columns and 18 numbered rows provides more than enough space for a securely prototyped circuit.

Molex friction lock connector set with 0.100" pitch. This set features (5) 2-pin headers, (5) housings, and (15) 22-AWG crimps.

DB15M Connector with Solder Cup Termination

These jumper wires make it easy to interface your project or breadboard to an Arduino, Beagle Bone, or Raspberry Pi. They are stranded 26 awg wires with a male and female termination. The wire are assorted colors.

This long break-away header set allows you to easily connect Arduino shields to Arduino boards or as connecting headers for breadboards.

This black mini breadboard features 170 tie points and provides enough space to test simple circuits. The breadboard features an adhesive backing and two screw mounting points to securely attach it to your robot!

This blue mini breadboard features 170 tie points and provides enough space to test simple circuits. The breadboard features an adhesive backing and two screw mounting points to securely attach it to your robot!

This is a 2x3 ICSP shield header for the Arduino. Very useful for connecting Arduino shields.

This 2-pin female JST-XHP connector has 12-inch (30-cm) 22 AWG wires that mates with our Ethernet switch modules.

3.5mm screw terminal block, 8 position, PCB mount

3.5mm screw terminal block, 5 position, PCB mount

3.5mm screw terminal block, 3 position, PCB mount

3.5mm screw terminal block, 2 position, PCB mount

Panel Mount for 2.1mm x 5.5mm barrel plug power jack. Assembly has a diameter of 11.60mm and has a depth of 13.00mm. Perfect for providing a power interface for enclosures.

2.1mm (5mm) female barrel plug assembly with 6” 18AWG wire leads. Perfect for interfacing your project with any compatible AC power transformer.

This is a 4-pack of female spade terminal ends (F2 Terminals, 0.250" FASTON receptacles) and heat shrink.

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors.

This pair of authentic Arduino 10 pin Female/Male header strips is very useful for connecting Arduino board extensions.

This authentic Arduino pair of 6 pin Female/Male header strips is very useful for connecting Arduino board extensions.

This authentic Arduino pair of 8 pin Female/Male header strips is very useful for connecting Arduino board extensions.

This authentic Arduino snappable header set allows you to easily connect Arduino shields to Arduino boards.

These stackable 0.1" (2.54 mm) female headers are just the right height for connecting Arduino shields to Arduinos and other shields.

These premium jumper wires are stranded 26 awg wires with female terminations on one end and male terminations on the other end.

These premium jumper wires are stranded 26 awg wires with *male terminations on both ends*, for use with 0.1" (2.54 mm) female headers and breadboards. The assortment of *6" (15 cm)* wires includes 5 each of 10 different colors.

These premium jumper wires are stranded 26 awg wires with * female terminations on both ends*, for use with 0.1" (2.54 mm) male headers and breadboards. The assortment of *6" (15 cm)* wires includes five each of 10 different colors.