PLEASE NOTE: Our Office will be closed on Thursday and Friday (11/26 and 11/27) for Thanksgiving and Black Friday. Our business hours will resume at 8 AM EST Monday (11/30).
We have sold these variety of prebuilt robots ranging from slightly used robots to prototypes with little to no wear. Although these are sold, if you contact us we may be able to build you another one. All SuperDroid robots are built in North Carolina, USA. If you're looking for a specialized robot, fill out our robot request form.
MAKE SURE YOU ARE NOT FILTERING "Hide Out of Stock Items:", THESE ARE SOLD ROBOTS, SO THERE IS NO STOCK AND NOTHING WILL SHOW IF FILTERED.
This is a NEW Pre-Built Ready to Run Heavy Duty All-Terrain Robot platform with 52mm gear motors. Built to navigate through rough terrain and over small obstructions.
This is our largest standard treaded tactical (UGV) robot model. It is a excellent tactical surveillance and inspection robot ready to conduct remote surveillance for 1st responders. This is a refurbished demo with new batteries, radios, and electronics.
This is our LT2-F NIST qualified security robot with an enclosed robot chassis with rear flippers/stabilizers, camera tilt system, custom controller, video console, and battery charging station.
This is a fully assembled, second-generation LT2 robot platform. We use the same chassis in our tactical LT2. It's similar to our HD2 treaded robot, but it's lighter.
This is a prebuilt MLT-JR tracked robot platform equipped with 12V 32-millimeter motors, a motor controller and an authentic Arduino for autonomous control.
This is a programmable autonomous robot prebuilt kit that can be controlled via Gamepad. The MarvelMind IPS (Indoor Positioning System) provides indoor navigation. BeagleBone Black (Rev C) microcontroller provides the most flexible platform possible.
This is a direct drive 4WD base Programmable robot kit that uses Nexus mecanum wheels. It is an Arduino robot platform for indoor robotics. It can vector in any direction. We added a Programable Wi-Fi kit to it.
This robot is a prebuilt 2WD All Terrain Robot (ATR) designed and fabricated in North Carolina USA. This robot supports our IG42 planetary gear motors.
This is a custom tank that we built with powerful wheelchair motors. The platform has 6 inch wide treads allowing this robot to navigate the toughest terrains.
This is a modified MLT-JR tracked robot platform to have a Tri-Wheel Track assembly. It's equipped with 32mm motors, a motor controller, and Spektrum remote control. This is a rugged treaded robot platform that is assembled and ready to go!
This prebuilt compact 4WD wheeled robot platform is equipped with 32-millimeter motors, a motor controller and Spektrum remote. This prebuilt is a customized version of TP-151-032. It has 4-inch tires.
This is a Prebuilt WiFi robot kit, programmed and fully assembled ready to ship! The robot is 4WD and is controlled from a PC using a WiFi connection. The robot also has an IP camera mounted on a pan and tilt system so you can see where you are going.
This is a 4WD IG42 single bearing platform that includes autonomous GPS navigation. A full array of sensors including a Pololu IMU, motor encoders, and a Garmin 18x 5 Hz GPS that work together to provide waypoint navigation with up to 3 meter accuracy.
This easy-to-use tracked robot is designed for tight spaces and low ceilings. It has a full pan and tilt camera with 30X optical zoom. Controlled with tablet controller and 250 ft tether with spool.
This is a customized version of our LT2-F built for inspecting long tunnels. It has custom flipper arms to help pull itself loose from any obstacles and is controlled by a 500 meter fiber optic tether spool.
This is our prebuilt HD2-S robot modified with a 5 axis robotic manipulator arm. This robot is loaded with all the options including a programmable Arduino. Ready to ship. We will supply the Source Code.
This robot kit consists of the 2WD robot chassis and provides all the necessary parts to turn the robot chassis into a operational robot. The supports our IG32 planetary gear motors.
This is a custom Heavy Duty All-Terrain Robot platform with 42mm gear motors. It has an oversize platform and a 5ft tall mast with a mount for a camera. It is intended for shooting 360 video.
This is a Pre Built direct drive 4WD base Programmable robot kit that uses Nexus mecanum wheels and hubs. Its a Arduino robot platform for indoor robotics. It can vector in any direction. Customized version of TP-096-004.
This is a larger IG32 gear motor robot that utilizes three omni-wheels to vector it in any direction. By changing the speeds and directions of the motors the robot can drive in any direction without needing to turn. Customized version of TP-253-003.
This is our Enclosed Ultra Heavy-Duty All-Terrain Mobile Robot Platform. It uses powerful wheel chair motors and 13" tiller tires. Perfect for outdoor surveillance and object detection, this robot is configurable to meet your requirements.
A Prebuilt Enclosed wheeled robot platform. Equipped with an enclosed aluminum weather resistant chassis, four 42mm gear motors, 10x PTZ camera system, and fully assembled, ready to run. Perfect for indoor and/or outdoor surveillance or inspection.
Completely waterproof and submersible, this is our WiFi controlled IG42 SB Amphibious robot. It features four cameras, including a 10x PTZ dome camera and comes assembled and ready to run; no programming necessary.
A Prebuilt Enclosed wheeled robot platform. Equipped with an enclosed aluminum weather resistant chassis, four 42mm gear motors, 10x PTZ camera system, and fully assembled, ready to run. Perfect for indoor and/or outdoor surveillance or inspection.
This is a Prebuilt version of our Heavy Duty All-Terrain Robot platform with 42mm gear motors. It is built to navigate through rough terrain and over small obstructions.
This a prebuilt SDR 4WD remote control robot snowplow kit. This is the new and improved design with powerful wheelchair motors and a 42-inch plow. Plow your driveway while you stay warm inside.
This prebuilt robot uses our standard ATR chassis and 10-inch traction lug tires. It's ready to run, and includes batteries, controllers and chargers. It has never been used.
This is a prebuilt SDR 6WD remote control snowplow robot. This is the new and improved design with powerful wheelchair motors and a 48-inch plow. Plow your driveway while you stay warm inside.
This is a custom tank that we built with powerful wheelchair motors and a 2-axis arm. The platform has up to 14" of ground clearance allowing this robot to navigate the toughest terrains.
This is a prebuilt MLT-JR tracked robot platform equipped with 12V 32-millimeter motors, a motor controller and an authentic Arduino for autonomous control. It also included a top-mounted 6-DOF arm with Maestro servo controller.
The BAT24 tracked platform is a large heavy duty tracked robot that is a size up from our HD2 platform. It uses more powerful motors, bigger batteries, and a bigger chassis than the HD2.
This is an Enclosed Heavy Duty All-Terrain Mobile Robot Platform. Perfect for outdoor mobile surveillance and object detection, this robot features a full HD video system and a custom wireless tablet control interface.
This is a prebuilt MLT-JR tracked robot platform equipped with 12V 32-millimeter motors, a motor controller and an authentic Arduino for autonomous control.
This is something every homeowner needs! This is a prebuilt robot that converts a 21" Yard Machines Lawnmower into a remote control lawnmower. It is assembled and ready to ship.
PREBUILT MLT-F compact tactical surveillance robot weighs less than9lbs. Treaded design and rear flipper arms allow this robot to climb many obstacles. Includes LED lights, microphone, and storage case. Also known as our Jack Russel Robot.
This is a custom 4-wheel drive snow removal remote control robot snowblower, which includes snow blower. The power of this robot will allow you to clear your driveway or sidewalk while you stay in the comfort of your home or business.
This is our LT2-F NIST qualified enclosed robot. This robot integrates a MultiRAE PGM-6228 HAZMAT sensor. The "FireBot" was made for the TV series on the science channel - All-American Makers airing February 18, 2015.
A Prebuilt Enclosed wheeled robot platform. Equipped with an enclosed aluminum weather resistant chassis, four 42mm gear motors, 10x PTZ camera system, and fully assembled, ready to run. Perfect for indoor and/or outdoor surveillance or inspection.
This is a prebuilt compact 4WD wheeled robot platform for inspection. It is equipped with 32-millimeter motors, a motor controller and a Spektrum remote. It has a wireless camera with tilt and lights. This pre-built is a customized version of TP-151-032.
Inspect hard to reach areas such as crawlspaces and attics with this complete inspection robot package. New Anodized Black Chassis. This complete inspection robot package includes a RunCam2 camera and high power LED lights. It records in HD 1080p.
