We have sold these variety of prebuilt robots ranging from slightly used robots to prototypes with little to no wear. Although these are sold, if you contact us we may be able to build you another one. All SuperDroid robots are built in North Carolina, USA. If you're looking for a specialized robot, fill out our robot request form.
MAKE SURE YOU ARE NOT FILTERING "Hide Out of Stock Items:", THESE ARE SOLD ROBOTS, SO THERE IS NO STOCK AND NOTHING WILL SHOW IF FILTERED.
Completely waterproof and submersible, this is our WiFi controlled IG42 SB Amphibious robot. It features four cameras, including a 10x PTZ dome camera and comes assembled and ready to run; no programming necessary.
This robot uses custom length sides and 10 inch Traction Lug tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. It has never been used.
This robot uses custom length sides and 10 inch tires with IG52 285 RPM motors. We have inclued everything to make it ready to run including batteries, chargers, and a controller.
This is a fully assembled, second-generation LT2 robot platform. We use the same chassis in our tactical LT2. It's similar to our HD2 treaded robot, but it's lighter.
This is a fully assembled second generation LT2-F robot platform. It is the same chassis and has the same mechanical components as our tactical LT2-F robot. The LT2 is lighter than the HD2 treaded robot. Customized version of TP-210-102.
This is a Pre Built direct drive 4WD base Programmable robot kit that uses Nexus mecanum wheels and hubs. Its a Arduino robot platform for indoor robotics. It can vector in any direction.
PREBUILT MLT-F Digital compact tactical surveillance robot weighs less than 9lbs. Treaded design and rear flipper arms allow this robot to climb many obstacles. Includes LED lights, microphone, and storage case. Also known as our Jack Russel Robot.
This robot uses custom length sides and 13 inch tires with IG52 82 RPM motors. We have inclued everything to make it ready to run including batteries, chargers, and a controller.
A Prebuilt Enclosed wheeled robot platform. Equipped with an enclosed aluminum weather resistant chassis, four 42mm gear motors, 10x PTZ camera system, and fully assembled, ready to run. Perfect for indoor and/or outdoor surveillance or inspection.
This is a Prebuilt version of our Heavy Duty All-Terrain Robot platform with 42mm gear motors. It is built to navigate through rough terrain and over small obstructions.
This robot uses custom length sides and 10 inch Traction Lug tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. It has never been used.
This robot uses custom length sides and 10 inch Traction Lug tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. It has never been used.
This robot uses custom length sides and 10 inch tires with IG52 285 RPM motors. We have inclued everything to make it ready to run including batteries, chargers, and a controller.
This a prebuilt SDR 4WD remote control robot snowplow kit. This is the new and improved design with powerful wheelchair motors and a 42-inch plow. Plow your driveway while you stay warm inside.
This is an SST tracked robot platform equipped with 32-millimeter motors, a motor controller and a Spektrum remote. It has a pan/tilt camera with 7 IR lights and a 100-foot video tether. This is a rugged treaded robot platform.
This prebuilt robot uses our standard ATR chassis and 10-inch traction lug tires. It's ready to run, and includes batteries, controllers and chargers. It has never been used.
This is a fully assembled LT2-F robot platform. It is our second generation of the LT robot. It is the same chassis and has the same mechanical components as our tactical LT2-F robot. The LT2 is lighter than the HD2 treaded robot.
This is a fully assembled, second-generation LT2 robot platform. We use the same chassis in our tactical LT2. It's similar to our HD2 treaded robot, but it's lighter.
This is a MLT-JR tracked robot platform and is equipped with 32mm motors, a motor controller, and Spektrum remote control. This is a rugged treaded robot platform. The robot handles up to 15lbs of additional payload and travels 300ft/min.
This robot uses custom length sides and 10 inch Traction Lug tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. It has never been used.
This is a MLT-JR tracked robot platform and is equipped with 32mm motors, a motor controller, and Spektrum remote control. This is a rugged treaded robot platform. The robot handles up to 15lbs of additional payload and travels 80ft/min.
This is a prebuilt SDR 6WD remote control snowplow robot. This is the new and improved design with powerful wheelchair motors and a 48-inch plow. Plow your driveway while you stay warm inside.
This robot has 10-inch traction lug tires and sides of custom length. It's brand new and ready to run, with batteries, controllers and chargers included.
This is a custom tank that we built with powerful wheelchair motors and a 2-axis arm. The platform has up to 14" of ground clearance allowing this robot to navigate the toughest terrains.
This robot uses custom length sides and 10 inch Traction Lug tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. It has never been used.
This is a modified MLT-JR tracked robot platform to have a Tri-Wheel Track assembly. It's equipped with 32mm motors, a motor controller, and Spektrum remote control. This is a rugged treaded robot platform is assembled and ready to go!
This is a prebuilt MLT-JR tracked robot platform equipped with 12V 32-millimeter motors, a motor controller and an authentic Arduino for autonomous control. It also included a top-mounted 6-DOF arm with Maestro servo controller.
This robot uses custom length sides and 10 inch Traction Lug tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. It has never been used.
This is a Custom Prebuilt LT2 robot. It has been designed to be shorter and wider specific size requirements. The treads were made custom length to fit the chassis and original LT2 wheels.
The BAT24 tracked platform is a large heavy duty tracked robot that is a size up from our HD2 platform. It uses more powerful motors, bigger batteries, and a bigger chassis than the HD2.
This is an Enclosed Heavy Duty All-Terrain Mobile Robot Platform. Perfect for outdoor mobile surveillance and object detection, this robot features a full HD video system and a custom wireless tablet control interface.
This is a prebuilt MLT-JR tracked robot platform equipped with 12V 32-millimeter motors, a motor controller and an authentic Arduino for autonomous control.
This is an MLT-JR tracked robot platform equipped with 32-millimeter motors, a motor controller and Spektrum remote. This is a rugged treaded robot platform capable of handling up to 15 pounds of additional payload. It can travel 300 feet per minute.
This is something every homeowner needs! This is a prebuilt robot that converts a 21" Yard Machines Lawnmower into a remote control lawnmower. It is assembled and ready to ship.
This is a used 6WD remote control robot with IG90 motors. The chassis was taken from a snow plow robot prototype. This platform has lots of speed and power making it a great hauling or towing robot.
This is a MLT-JR tracked robot platform and is equipped with 32mm motors, a motor controller, and Spektrum remote control. This is a rugged treaded robot platform. The robot handles up to 15lbs of additional payload and travels 300ft/min.
This prebuilt compact 4WD wheeled robot platform is equipped with 32-millimeter motors, a motor controller and Spektrum remote. This prebuilt is a customized version of TP-151-032. It has been upgraded with 6-inch foam filled tires.
This robot uses custom length sides and 10 inch tires with IG52 285 RPM motors. We have inclued everything to make it ready to run including batteries, chargers, and a controller.
This is a custom 4-wheel drive snow removal remote control robot snowblower, which includes snow blower. The power of this robot will allow you to clear your driveway or sidewalk while you stay in the comfort of your home or business.
This is a MLT-JR tracked robot platform and is equipped with 32mm motors, a motor controller, and Spektrum remote control. This is a rugged treaded robot platform. The robot handles up to 15lbs of additional payload and travels 300ft/min.
This prebuilt compact 4WD wheeled robot platform is equipped with 32mm motors, a motor controller, and Spektrum remote control. This pre-built is a customized version of TP-151-032.
This RTR robot uses custom length sides and 10 inch tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. It has never been used.
This prebuilt RTR robot uses our standard ATR chassis and 10 inch tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. It has never been used.
This is our LT2-F NIST qualified enclosed robot. This robot integrates a MultiRAE PGM-6228 HAZMAT sensor. The "FireBot" was made for the TV series on the science channel - All-American Makers airing February 18, 2015.
This is our LT2-F NIST qualified security robot with an enclosed robot chassis with rear flippers/stabilizers, camera tilt system, custom controller, video console, and battery charging station.
A Prebuilt Enclosed wheeled robot platform. Equipped with an enclosed aluminum weather resistant chassis, four 42mm gear motors, 10x PTZ camera system, and fully assembled, ready to run. Perfect for indoor and/or outdoor surveillance or inspection.
This is a direct drive 4WD base Programmable robot kit that uses Nexus mecanum wheels. It is an Arduino robot platform for indoor robotics. It can vector in any direction. Includes a choice of an authentic Arduino for making a great Autonomous Robot.
This is a MLT-JR tracked robot platform and is equipped with 32mm motors, a motor controller, and Spektrum remote control. This is a rugged treaded robot platform. The robot handles up to 15lbs of additional payload and travels 300ft/min.
