These are some of our Pre-Built, Fully Assembled, and Tested Robot kits that have sold. If you see something you like, let us know and we can build it again for you!
New prebuilt, demo, and refurbished Tactical Robots. EOD Robots, SWAT Robots, Law Enforcement Robots, Military Robots, Surveillance Robots, UGV's, and Security Robots
This complete inspection robot package includes a RunCam2 camera and high power LED lights. It records in HD 1080p. This is a rugged treaded robot platform for inspecting hard to reach areas such as crawlspaces and attics.
This is a MLT-42-F tracked robot platform and is equipped with flipper arms, 42mm motors, a motor controller, and Spektrum remote control. This rugged robot platform the treaded robot handles up to 15lbs of additional payload and travels 150ft/min.
This is a Compact Tracked Robot Platform, equipped with a High Definition Pan and Tilt Camera for inspection purposes. It is a complete system including a Storage Case, Robot, Remote with HD monitor, Tether, Chargers, and SD card for recording HD video.
This prebuilt RTR robot uses our standard ATR chassis and 10 inch tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. Upgraded drive train with encoders on each motor set to speed control.
This is a Compact Tracked Robot Platform, equipped with a High Definition Pan and Tilt Camera for inspection purposes. It is a complete system including a Storage Case, Robot, Remote with HD monitor, Tether, Chargers, and SD card for recording HD video.
This is a fully assembled LT2-F robot platform. It is our second generation of the LT robot. It is the same chassis and has the same mechanical components as our tactical LT2-F robot. The LT2 is lighter than the HD2 treaded robot.
This is a MLT-JR tracked robot platform and is equipped with 32mm motors, a motor controller, and FLYSKY remote control. This robot is a prebuilt version of TP-220-001, and can handle up to 10lbs of additional payload/speeds up to 85 feet per minute.
This ATR robot uses custom length sides and 10 inch tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. It has been fitted with a custom top cover.
This ATR robot uses custom length sides and 10 inch tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. It has been fitted with a custom top cover.
This robot uses custom length sides and 10" traction lug tires with IG52 136 RPM motors. We have included everything to make it ready to run including batteries, chargers, and a controller.
The MiniSLAM is a programmable autonomous robot built on the Robot Operating System (ROS). It is controlled using a USB gamepad and the ROS Visualization (RViz) application.
This ATR robot uses custom length sides and 10 inch tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc.
This robot has a pivot center with custom length sides and 10 inch tires with IG52 136 RPM motors. We have included everything to make it ready to run including batteries, chargers, and a controller. Customized version of TP-046-000.
This robot uses custom length sides and 13 inch tires with IG52 82 RPM motors. We have inclued everything to make it ready to run including batteries, chargers, and a controller.
This is a MLT-JR-HC tracked robot platform. It is desigend to allow a higher clearance and is equipped with 32mm motors, a motor controller, and Spektrum remote control. This is a rugged treaded robot platform.
This is a MLT-JR tracked robot platform and is equipped with 32mm motors, a motor controller, and Spektrum remote control. Robot chassis painted with Tactical Tan bed-liner. Robot handles up to 5lbs of additional payload, travels up to 78 fpm.
This is a small tracked robot equipped with 42mm motors, a motor controller, and Spektrum remote control. This is a customized prebuilt version of TP-230-042 with added track brackets.
This is a small tracked robot equipped with 42mm motors, a motor controller, and Spektrum remote control. This is a customized prebuilt version of TP-230-042 with added track brackets.
This is a MLT-JR tracked robot platform and is equipped with 32mm motors, a motor controller, and Spektrum remote control. This robot is a prebuilt version of TP-220-001, and can handle up to 10lbs of additional payload/speeds up to 85 feet per minute.
This is a MLT-JR tracked robot platform and is equipped with 32mm motors, a motor controller, and Spektrum remote control. This robot is a prebuilt version of TP-220-001, and can handle up to 8lbs of additional payload/speeds up to 300 feet per minute.
This is a MLT-JR tracked robot platform and is equipped with 32mm motors, a motor controller, and Spektrum remote control. This robot is a prebuilt version of TP-220-001, and can handle up to 8lbs of additional payload/speeds up to 200 feet per minute.
This is a prebuilt RC lawnmower. It is fully assembled and tested and includes the mower. This is our Rev 2 Mower. It is faster, more powerful, and has a longer run time.
This is a fully assembled, second-generation LT2 robot platform. We use the same chassis in our tactical LT2. It's similar to our HD2 treaded robot, but it's lighter.
This is a Pre Built direct drive 4WD base Programmable robot kit that uses Nexus mecanum wheels and hubs. Its a Arduino robot platform for indoor robotics. It can vector in any direction. Customized version of TP-142-004.
This is a larger IG32 gear motor robot that utilizes three omni-wheels to vector it in any direction. By changing the speeds and directions of the motors the robot can drive in any direction without needing to turn.
This is a prebuilt MLT-JR tracked robot platform equipped with 12V 32-millimeter motors, a motor controller and an authentic Arduino for autonomous control.
This is a Custom MLT-JR tracked robot platform, equipped with a pan and tilt camera for inspection purposes. It comes complete with a custom controller with built-in tablet.
This robot is a prebuilt 2WD All Terrain Robot (ATR) designed and fabricated in North Carolina USA. This robot supports our IG42 planetary gear motors.
This is a prebuilt version of TP-251-003, our programmable triangular omni wheel vectoring robot. It can vector in any direction and is great for indoor robotics. An Arduino Mega and encoders allow for this to be an autonomous robot.
This is a custom tank that we built with powerful wheelchair motors. The platform has 6 inch wide treads allowing this robot to navigate the toughest terrains.
This is a modified MLT-JR tracked robot platform to have a Tri-Wheel Track assembly. It's equipped with 32mm motors, a motor controller, and Spektrum remote control. This is a rugged treaded robot platform that is assembled and ready to go!
This is a 4WD IG42 single bearing platform that includes autonomous GPS navigation. A full array of sensors including a Pololu IMU, motor encoders, and a Garmin 18x 5 Hz GPS that work together to provide waypoint navigation with up to 3 meter accuracy.
This is a direct drive 4WD base Programmable robot kit that uses Nexus mecanum wheels and hubs. This robot platform is meant for indoor robotics. It can vector in any direction. Prebuilt version of TP-095-004.
This prebuilt 4WD wheeled robot platform is equipped with 32mm motors, a motor controller, and Spektrum remote control. This prebuilt is a customized version of TP-132-032.
This is a Pre Built robot that utilizes 4 omni omni-wheels to vector it in any direction. By changing the speeds and directions of the motors the robot can drive in any direction without needing to turn. Customized version of TP-090-004.
This is a Pre Built direct drive 4WD base Programmable robot kit that uses Nexus mecanum wheels and hubs. Its a Arduino robot platform for indoor robotics. It can vector in any direction. Customized version of TP-096-004.
This is a larger IG32 gear motor robot that utilizes three omni-wheels to vector it in any direction. By changing the speeds and directions of the motors the robot can drive in any direction without needing to turn.
This is a larger IG32 gear motor robot that utilizes three omni-wheels to vector it in any direction. By changing the speeds and directions of the motors the robot can drive in any direction without needing to turn. Customized version of TP-253-003.
This is a modified MLT-JR tracked robot platform to have a Tri-Wheel Track assembly. It's equipped with 32mm motors, a motor controller, and Spektrum remote control. This is a rugged treaded robot platform that is assembled and ready to go!
This robot kit consists of the 2WD robot chassis and provides all the necessary parts to turn the robot chassis into a operational robot. The supports our IG32 planetary gear motors.
The RP2W is a telepresence robot which allows people in different geographical locations to connect via a mobile robot. This robot uses a Windows tablet with Skype for the interface and a Arduino controlled vectoring tri-wheel platform for the base.
Have a robot bring you a beer! This is a prebuilt version of our mobile robot platform equipped with a keg tap system and a keg shell ice bucket. Get a sixth barrel keg and some ice, and you're ready to go.
The HD2 tracked platform is a large, heavy duty tracked robot with the power to pull a truck and climb stairs. A wealth of internal space allows for batteries, controls and an optional computer. Customized version of item TP-200-001.
This is a prebuilt SDR 6WD remote control snowplow robot. This is the new and improved design with powerful wheelchair motors and a 48-inch plow. Plow your driveway while you stay warm inside.
This is a prebuilt triangular vectoring robot platform (TP-090-003) powered by an Arduino Uno. The chassis can support up to 25 pounds of payload. It is prebuilt and ready to run.
This prebuilt compact 4WD wheeled robot platform is an ideal base for surveillance, inspection, and hobby projects. It is equipped with 32-millimeter motors, a motor controller and a Spektrum remote control. Customized version of TP-150-032.
This is a Compact Tracked Robot Platform, equipped with a High Definition Pan and Tilt Camera for inspection purposes. It is a complete system including a Storage Case, Robot, Remote with HD monitor, Tether, Chargers, and SD card for recording HD video.
