Switches and Relays

A master battery disconnect switch is a lever-operated battery cutoff switch that will disconnect power for the battery circuit.

RELAY GENERAL PURPOSE DPDT 8A 5V

This is a Two Pole Single Throw (2PST) Power switch. The contacts are rated at 25Amps.

The Mini Relay Shield allows to trigger external loads like lamps, fans, home appliances, garage doors, and other things, in an easy way.

30A relay carrier with control circuity to open and close the relay using a microcontroller. Available options include 12V, or 24V relays.

10A relay carrier with control circuity to open and close the relay using a microcontroller. Available options include 5V, 12V, or 24V relays.

This is a High current driver that will take TTL signals from your Arduino, etc to drive the relays. It includes status LEDs for each input. 5V, 12V, and 24V relay options are available. This item replaces TE-010-405 and TE-010-412

Powered by the ULN2003 high current driver, this module gives you easy control of up to 7 relays using TTL logic from an Arduino, Beagle Bone, or Raspberry Pi. 5V, 12V, and 24V relay options.

This is the deluxe version of our robot power distribution modules. The module features 4 relays for two independent drive and control batteries as well as additional power output connections. Perfect for solutions requiring much more power.

This is an upgrade for the basic robot power distribution board. The module features additional power outputs and a second control power relay. Perfect for more advanced solutions.

This is a basic power distribution board for robotic applications. The relay module features screw terminal connectors for your control and drive batteries, charging, power switch, and external LED.

These are high quality sealed Single Pole - Single Through (SPST) relays. This relay's coil is rated for 24V.

These are high quality sealed Single Pole - Single Through (SPST) relays. This relay's coil is rated for 12V.

These are high quality sealed Single Pole - Double Through (SPDT) relays. This relay's coil is rated for 24V.

These are high quality sealed Single Pole - Double Through (SPDT) relays. This relay's coil is rated for 12V.

These are high quality sealed Single Pole - Double Through (SPDT) relays. This relay's coil is rated for 5V.

This 24 volt insulated continuous solenoid switch features a single pole single throw actuation style and is advantageous from using relays because it generates a larger output while allowing a low input.

This 12 volt solenoid is an insulated continuous switch and is ideal for 12 volt vehicle starters, winches, snow plows or other heavy electric motors. An insulated continuous 12 volt solenoid switch allows for a low input while generating a larger output.

BattleSwitch is a relay switch that you toggle via hobby radio control gear. You can use BattleSwitch to quickly and easily control glow plugs, BattleBot weaponry and more. Made by Dimension Engineering.

This is a Four Pole Single Throw (4PST) Power switch. The contacts are rated at 25Amps.

This is a Relay circuit driven by TTL singles. A DPDT and SPDT relay are connected to allow you to drive a load in forward/off/reverse.

Similar to the 6P Toggle Switch (TAM-042-000) but with a self-centering function that causes the control to go back to center when released. Handles up to 5A.

Set this Tamiya 2 pole on/off/on DPDT for a variety of functions. Handles up to 5A. Use with Tamiya Construction and Robotics projects

This is a two-position switch 2 pole, on/off switch. Handles up to a 4A @ 6V. This switch works well in low power applications. Use in a variety of Tamiya Construction or Robotics projects.

The I/O Connector Board can be used to provide 8 switch/push buttons with LED indicators showing the status of the I/O pin. Made by Elexol.

Tamiya momentary SPDT Lever Switch. Works well as a bumper switch on you robot.

This is a Single Pole Double Throw two position switch.