Used and Surplus Items

A set of 2 Replacement Tires and Wheels for the Tamiya RC series.

900 MHz Rubber Duck Antenna - Male Type F Connector

Open Box - The MGS1600GY is a sensor capable of detecting and reporting the position of a magnetic field (typically magnetic tape on the floor) along its horizontal axis. with custom aluminum mounting bracket

900 MHz 3 dBi Rubber Duck Antenna - RP-SMA Plug Connector

900 MHz 3 dBi Rubber Duck Antenna - SMA Male Connector

900 MHz 5dBi Rubber Duck Antenna - SMA Male Connector

Slightly Used Solid-State ToF Infrared LiDAR CE30-A with custom aluminum mounting bracket and cables.

Used - 5" Black Plastic PA Horn 12 Watt 8 Ohm 10' Speaker Cord 3.5mm Plug

Used 8" USB Monitor - OPEN BOX

Used Lilliput 8" LCD TFT Flat Panel Screen - OPEN BOX

Used Pegasus 7" LCD TFT Flat Panel Screen - OPEN BOX

USED - This is a monitor that can be used with the wireless cameras. It has Video and Audio input.

USED - This is a color LCD monitor that can be used with the wireless cameras. It has Video and an AC plug transformer.

USED - This is a monitor that can be used with the wireless cameras. It has Video and Audio input.

USED - These are 4" in diameter omni-wheels with a shaft, collars and a bearing.

The ERB300H is a Wireless N300 HD Media Bridge and Range Extender that provides great wireless coverage, so remote Ethernet-enabled devices can connect to a network.

This wireless router fits perfectly on top of any of our chassis options. Establish a 54Mbps wireless connection with enhanced wireless security.

The iPocket232™ RS232 to Ethernet converter captures the proven reliability of our most popular Remote Access products in a compact, cost-competitive package. Made by Precidia Technologies.

Dimension Engineering Sabertooth 2X12 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for medium powered robots - up to 30lbs in combat or 100lbs for general purpose robotics. Replaced TE-091-210.

Used for testing, TF02 Single Point Ranging LiDAR, connectors have been changed for testing.

Used for testing: TFMINI Micro LiDAR Module, connectors have been changed for testing.

Gently Used. Includes Cable. Compact, lightweight and easy to use. From low mounting in AGVs to vertical mounting for access protection, the compact body fits for wide range of applications.

USED Pro Charging System with a 12 Amp Output and Two 6 Amp Banks. Model RS2. This was used in a prototype and are sold as is. What you see in the picture is what you get.

The XF series provides the best interactive HMI solution for any embedded application. The XF series is specially designed to meet harsh environment such as sustaining extreme shock and vibration.

A used servo motor that comes with an attached encoder.

A Pair of Used Servo Motors with gearbox and encoders.

The G320X is the newest servo drive from Geckodrive, Inc. Built around the same high speed CPLD as the G203V and offering the same bulletproof protection. These were used in a prototype and are sold as is. What you see in the picture is what you get.

This is a perfect power source for stepper motors. It has 36V output @ 10A continuous.

We have a bunch of power supplies laying around. This is a bag of 5 randomly selected power supplies (wall warts). 110VAC input. About 6 inches of wire with no ends. If you need a power supply (wall wart), you can't beat this deal.

We have a bunch of power supplies laying around. This is a bag of 3 randomly selected 12VDC power supplies (wall warts). 110VAC input. About 6 inches of wire with no ends. If you need a power supply (wall wart), you can't beat this deal.

We have a bunch of power supplies laying around. This is a bag of 3 randomly selected 9VDC power supplies (wall warts). 110VAC input. About 6 inches of wire with no ends. If you need a power supply (wall wart), you can't beat this deal.

Surplus item priced to move! Steel Ball Bearings Flanged for 3/8" Shaft Dia, 7/8" OD.

Surplus item priced to move! Steel Ball Bearing Flanged for 5/8" Shaft Dia, 1 3/8" OD.

Double SportBEC Switch-mode BEC mounted on a custom PCB.

This is the EDTP AirDrop-F Wireless Lan Development Board. We have the TEW-222CF WiFi CompactFlash Network Card and a development board we made.

D-Link Xtreme G Wireless Notebook Adapter to the IEEE 802.11g standard.

Campbell Hausfeld inline Filter

This is a High current driver that will take the 5V TTL signal from your OOPic, Basic Stamp, etc and drive any all of the 4 relays. 3 other channels are left open for other applications. It includes status LEDs for each input.

This is a Used Brushless Cooling Fan measuring 40mmX40mmX10mm square and is powered by 24VDC.