Wheels and Shafts

pack of 2, 12mm Hex Mounting Hubs for 6mm shaft light-weight aluminum mounting hubs for a typical motor output shaft into a 12 mm hex shaft that is compatible with many RC wheels.

pack of 2, 12mm Hex wheel adapter for 6mm shaft light-weight aluminum shaft adapters convert a typical motor output shaft into a 12 mm hex shaft that is compatible with many RC wheels.

These are 6" inch diameter Mecanum wheels with custom shafts, lock collars, and bearings.

This is a single axle with a hub that mounts to our 6 inch tires. The end opposite the hub is bored to fit an 8mm shaft. It is intended to be direct driven by our IG42 motors. The hub is welded to a steel 1/2" diameter shaft.

This is a single axle with a hub that mounts to our 13 inch tires. It is intended to be chain driven. The hub is welded to a steel 5/8" diameter shaft with a 3/16" keyway.

This is a single axle with a hub that mounts to our 13 inch tires. It is intended to be chain driven in our IG52 DB robot kit. The hub is welded to a steel 5/8" diameter shaft.

These large Tiller Traction Lug wheels are 13" in diameter. They come as pair and have steel 5/8" diameter shafts and bearings.

One pair of 10" wheels with aggressive treads and shafts. The shafts are machined steel with a welded hub. They are for our Heavy Duty and Enclosed Heavy Duty ATRs. These will not work for our Standard ATRs.

This is a pair of 10" wheels and shafts. The shafts are machined steel with a welded hub. They are for our Heavy Duty and Enclosed Heavy Duty ATRs. These will not work for our Standard ATRs.

This is a single axle with a hub that mounts to our 13 inch tires. The end opposite the hub is bored to fit a 12mm shaft. It is intended to be direct driven by our IG52 motors. The hub is welded to a steel 5/8" diameter shaft.

These are 4" in diameter omni-wheels with a shaft, collars and a bearing. Formerly item# TD-145-002

This is a pair of 6 inch pneumatic rubber tires with steel rims and a 5/8" steel shaft, 8mm bore. They come as pair (2 wheels, 2 shafts and hardware).

These heavy duty 8 inch (203mm) Stainless Steel mecanum wheels allow your robot to easily move laterally, diagonally, or spin in a circle. This set includes four wheels. These heavy duty wheels are rated for 200kg!

This wheel and shaft set is for direct driving with wheelchair motors. It comes with two steel keyed shafts and two 13 inch tiller tires.

These is a a single axle that mounts to our 13 inch traction lug tire. It is for direct driving with our wheelchair motors. They are steel with a 5mm keyway.

These is a a single axle that mounts to our 13 inch traction lug tread ATR tiller tires. They are steel with 3/4" diameter shafts and a standard 3/16" keyway.

This is a single axle with a hub that mounts to our 10 inch tires. It is intended to be chain driven. The hub is welded to a steel 1/2" diameter shaft.

This is a single axle with a hub that mounts to our 6 inch tires. It is intended to be chain driven. The hub is welded to a steel 1/2" diameter shaft.

This is a single axle with a hub that mounts to our 6 inch tires. The end opposite the hub is bored to fit an 6mm shaft. It is intended to be direct driven by our IG32 motors. The hub is welded to a steel 1/2" diameter shaft.

This is a single axle with a hub that mounts to our 10 inch tires. The end opposite the hub is bored to fit a 12mm shaft. It is intended to be direct driven by our IG52 motors. The hub is welded to a steel 5/8" diameter shaft.

This is a single axle with a hub that mounts to our 10 inch tires. The end opposite the hub is bored to fit an 8mm shaft. It is intended to be direct driven by our IG42 motors. The hub is welded to a steel 1/2" diameter shaft.

This is a single axle with a hub that mounts to our 6 inch tires. The end opposite the hub is bored to fit a 6mm shaft. It is intended to be direct driven by our IG32 motors. The hub is welded to a steel 1/2" diameter shaft.

This is a single axle with a hub that mounts to our 6 inch tires. The end opposite the hub is bored to fit an 8mm shaft. It is intended to be direct driven by our IG42 motors. The hub is welded to a steel 1/2" diameter shaft.

The 4 inch (100mm) aluminum Mecanum wheel set (2x Left, 2x Right) allows your robot to easily move forward and backward (reverse), laterally, diagonally, or spin in a circle. Each roller has a plastic sleeve bearing. Nexus part# 14162.

These heavy duty 6 inch (152mm) Stainless Steel mecanum wheels allow your robot to easily move laterally, diagonally, or spin in a circle. This set includes four wheels. These heavy duty wheels are rated for 150kg! (Formerly TD-090-152)

These wheels are large traction lug tread ATR tiller tires. They are 13" in diameter. They come as pair and have steel 3/4" diameter shafts with a standard 3/16" keyway.

Heavy duty robot wheel with aggressive tread. It does not have a bearing. It's 13 inches in diameter. 4" inches wide. Its pneumatic with a 5 bolt pattern so you can easily mount it to a flanged hub.

Heavy duty robot wheel with traction lug Tiller tread. It does not have a bearing. Size: 3.5-4. It's 10.5 inches in diameter, 3.5" inches wide. Its Pneumatic with a 4 bolt pattern so you can easily mount it to a flanged hub.

These wheels are large traction lug tread ATR tiller tires. They are 10.5" in diameter. They come as pair and have steel 1/2" diameter shafts and bearings for our IG42 standard ATRs with a 8mm bore.

These large Tiller Traction Lug wheels are 10" in diameter. They come as pair and have steel 5/8" diameter shafts and bearings for our IG52 motors with 12mm shafts.

One pair of 10" wheels with aggressive treads and shafts. The shafts are machined steel with a welded hub. They are for our Heavy Duty and Enclosed Heavy Duty ATRs. These will not work for our Standard ATRs.

This is a pair of 6 inch pneumatic rubber tires with steel rims and a 1/2" steel shaft, 6mm bore, 1/2" ID ball bearing. They come as pair (2 wheels, shafts, bearings, collars and hardware).

This is a pair of 6" wheels and shafts. The shafts are machined steel with a welded hub. They are for our Heavy Duty and Enclosed Heavy Duty ATRs. These will not work for our Standard ATRs.

This is a pair of 6 inch pneumatic rubber tires with steel rims and a 1/2" steel shaft, 1/2" ID ball bearing for additional support, bored to accept 8mm motor shaft. Includes: 2 pneumatic wheels, shafts, bearings, collars and hardware.

This is a robot drive wheel we had made specifically for us. It does not have a bearing. Its 6 inches in diameter. 1.9" inches wide. Its a rubber pneumatic tube tire. The rim has a 4 bolt pattern so you can easily mount it to a flanged hub.

This is a pair of 6 inch pneumatic rubber tires with steel rims and a 5/8" steel shaft, 6mm bore. They come as pair (2 wheels, 2 shafts and hardware).

These heavy duty 6 inch (152mm) aluminum mecanum wheels allow your robot to easily move laterally, diagonally, or spin in a circle. This set includes four wheels. The rollers use ball bearings for high load capacity.

These are 8" inch diameter Mecanum wheels with custom shafts, lock collars, and bearings.

These are 4" in diameter omni-wheels with a shaft, collars and a bearing. Formerly item# TD-145-002

The new simple motor and encoder kit from DAGU combines low cost, reliable encoders with powerful geared motors and 65mm diameter wheels with soft rubber tires and foam rubber inserts. The kit is a pair (One Left and one Right).

The four Mecanum wheels are each connected to a separate motor with independent control. The robot can drive in any direction - even while spinning!

This is a robot drive wheel we had made specifically for us. It does not have a bearing. It's 10 inches in diameter. 3" inches wide. Its Pneumatic with a 4 bolt pattern so you can easily mount it to a flanged hub.

These 8mm bore flush mounted hubs move the wheels closer to the chassis, lessening the cantilever load. They are specifically designed for our Nexus mecanum wheels.

These flush mounted 6mm bored hubs move the wheels closer to the chassis, lessening the cantilever load. They are specifically designed for our Nexus mecanum wheels.

A 1/2 inch hub is used to connect a wheel to the motor. This hub fits all Nexus Robot wheels.

An 12mm Hub used to connect a wheel to the motor. This hub fits all Nexus Robot wheels.

A 6mm Hub used to connect a wheel to the motor. This hub fits all Nexus Robot wheels.

An 8mm Hub used to connect a wheel to the motor. This hub fits all Nexus robot wheels.

The 4 inch (100mm) Nexus Robot double plate aluminium Omni wheels have rubber rollers mounted along its circumference to help avoid slipping. Each roller has two bearings which allow the wheel to move smoothly and easily in ANY direction.

The 4 inch (100mm) plastic omni wheel is a durable, double row wheel that provides easy 360 degree movement, with rotational and sideways maneuverability.