Indoor GPS Starter Kit featuring one Modem and five Beacons to get your project running. Accurately position your robot to a couple centimeters indoors! Kit includes 4 standard beacons and 1 beacon with built in IMU.
Mount beacons on walls or ceilings to measure distance to other beacons and “hedgehog” using ultrasonic pulses. They communicate with router wirelessly in ISM band. Powered by LiPo battery or USB. The beacon has a built in Inertial Measurement Unit (IMU).
This is a fully assembled LT2-F robot platform. It is our second generation of the LT robot. It is the same chassis and has the same mechanical components as our tactical LT2-F robot. The LT2 is lighter than the HD2 treaded robot.
This is a fully assembled, second-generation LT2 robot platform. We use the same chassis in our tactical LT2. It's similar to our HD2 treaded robot, but it's lighter.
This is a Pre Built direct drive 4WD base Programmable robot kit that uses Nexus mecanum wheels and hubs. Its a Arduino robot platform for indoor robotics. It can vector in any direction. Customized version of TP-096-004.
This is a larger IG32 gear motor robot that utilizes three omni-wheels to vector it in any direction. By changing the speeds and directions of the motors the robot can drive in any direction without needing to turn.
The B3 Compact charger is a very simple to use charger for 2S and 3S battery packs. No need for additional power supplies or 12v batteries as this little unit has its own built in power supply that can be powered with 100-240v.
The iPocket232™ RS232 to Ethernet converter captures the proven reliability of our most popular Remote Access products in a compact, cost-competitive package. Made by Precidia Technologies.
Out of the box, the SyRen 25 motor driver can supply a single DC brushed motor with up to 25A continuously. Peak currents of 45A are achievable for a few seconds. Made by Dimension Engineering.
Out of the box, the SyRen 50 can supply a single DC brushed motor with up to 50A continuously. Peak currents of 100A are achievable for a few seconds. Made by Dimension Engineering.
Out of the box, the SyRen motor driver can supply a single DC brushed motor with up to 10A continuously. Peak currents of 15A are achievable for a few seconds. Made by Dimension Engineering.
The Sabertooth 2X25 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for medium powered robots - up to 30lbs in combat or 100lbs for general purpose robotics. Made by Dimension Engineering.
Dimension Engineering Sabertooth 2X12 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for medium powered robots - up to 30lbs in combat or 100lbs for general purpose robotics. Replaced TE-091-210.
Dimension Engineering Sabertooth 2X60 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for high powered robots - up to 120lbs in combat or up to 1000lbs for general purpose robotics.
This is a MLT-JR tracked robot platform and is equipped with 32mm motors, a motor controller, and Spektrum remote control. This robot is a prebuilt version of TP-220-001, and can handle up to 8lbs of additional payload/speeds up to 200 feet per minute.
The Sabertooth 2X32 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for medium powered robots - up to 30lbs in combat or 100lbs for general purpose robotics. Made by Dimension Engineering. OPEN BOX
This is a prebuilt MLT-JR tracked robot platform equipped with 12V 32-millimeter motors, a motor controller and an authentic Arduino for autonomous control.
This RTR robot uses custom length sides and 10 inch tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. It has been fitted with a custom top cover.
