The Spektrum AR620 air receiver is a full-range, 6-channel sport receiver with DSMX/DSM2 compatibility and a compact footprint that’s streamlined to fit in a wide range of models. Great for Robots too!

The DXe is the affordable way to equip your sport plane or trainer with the speed, and reliability of DSMX control. Of course it works great for robots too!

Mini module design ethernet switch circuit board for ethernet switch module 10/100mbps 5 port PCBA board OEM Motherboard.

Indoor GPS Starter Kit featuring one Modem and five Beacons to get your project running. Accurately position your robot to a couple centimeters indoors! Kit includes one modem, 4 standard beacons and 1 beacon with built in IMU.

This is a Compact Tracked Robot Platform, equipped with a High Definition Pan and Tilt Camera for inspection purposes. It is a complete system including a Storage Case, Robot, Remote with HD monitor, Tether, Chargers, and SD card for recording HD video.

This is an Enclosed 4-wheel drive remote control robot kit. It uses four powerful wheelchair motors and the inside robot cavity has plenty of room for electronics.

This is our LT2-F NIST qualified security robot with an enclosed robot chassis with rear flippers/stabilizers, camera tilt system, custom controller, video console, and battery charging station.

The RunCam 2 HD camera is designed for the FPV Racers. This mini HD camera provides high-resolution video and images at 1080P @60fps or 720P @120fps.

This prebuilt RTR robot uses our standard ATR chassis and 10 inch tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. Upgraded drive train with encoders on each motor set to speed control.

3D Scanning Range Finder. The distance is measured by steering the laser beam vertically and horizontally.

This is a direct drive 4WD programmable Arduino robot platform for indoor robotics. Using 4 Nexus mecanum wheels, it can vector in any direction.

This is our prebuilt HD2-S robot modified with a 5 axis robotic manipulator arm. This robot has be loaded with all the options and is ready to ship.

This is a Compact Tracked Robot Platform, equipped with a High Definition Pan and Tilt Camera for inspection purposes. It is a complete system including a Storage Case, Robot, Remote with HD monitor, Tether, Chargers, and SD card for recording HD video.

Programmable RC Vectoring Mobile Desk with 4 inch Mecanum Wheels. The mobile desk can drive in any direction and roll in under a bed allowing you to use your laptop with a secondary monitor while in bed.

This ATR robot uses custom length sides and 10 inch tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. It has been fitted with a custom top cover.

This ATR robot uses custom length sides and 10 inch tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc. It has been fitted with a custom top cover.

This complete inspection robot package includes a RunCam2 camera and high power LED lights. It records in HD 1080p. This is a rugged treaded robot platform for inspecting hard to reach areas such as crawlspaces and attics.

The compact (0.4″ × 0.5″) D24V5F5 switching step-down (or buck) voltage regulator takes an input voltage between 7V and 36V and efficiently reduces it to 5V while allowing for a maximum output current of 500 mA.

The ROS SLAM is a programmable autonomous robot built on the Robot Operating System (ROS). It is controlled using a USB gamepad and the ROS Visualization (RViz) application.

This robot uses custom length sides and 10" traction lug tires with IG52 136 RPM motors. We have included everything to make it ready to run including batteries, chargers, and a controller.

The MiniSLAM is a programmable autonomous robot built on the Robot Operating System (ROS). It is controlled using a USB gamepad and the ROS Visualization (RViz) application.

This ATR robot uses custom length sides and 10 inch tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc.

This robot has a pivot center with custom length sides and 10 inch tires with IG52 136 RPM motors. We have included everything to make it ready to run including batteries, chargers, and a controller. Customized version of TP-046-000.

This is a set of wheelchair motors and make great heavy duty robot motors. One left motor and one right motor. They are right angle gear drives with a release and electric brakes. They are 24VDC and the operating speed is 120 RPM.