10A Relay Controller
Hookup
- Vcc: Coil Voltage (if you are using a 24V coil, hook 24V up here, its what powers the coil and pulls in the contact)
- In: TTL input from microcontroller (can be 3.3V or 5V input, it will be what causes the coil to pull in)
- GND: Ground. This must be a common ground with the TTL in and the Coil Vcc power.
- COM: Common side of relay contact. Acts as a switch. Rated at relay ampacity.
- NO: "Normally Open" side of relay contacts. Acts as a switch. Normally Open. When coil is energized, the contact will change state and close. Rated at relay ampacity.
- NC: "Normally Closed" side of relay contacts. Acts as a switch. Normally Closed. When coil is energized, the contact will change state and open. Rated at relay ampacity.
Documentation
10A relay carrier with control circuity to open and close the relay using a microcontroller. Available options include 5V, 12V, or 24V relays.
10A Relay Controller
- Product Code: TE-265-010
- Brand: SuperDroid Robots
- Availability: 13 In stock
$9.90
