These chassis' are designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots, an industry leader in robotics. This is a CNC cut aluminum base intended for use with Nexus mecanum wheels and IG32 gear motors. It is designed so all of our planetary IG32 and IG32P gear motors with or without encoders will fit. It is not intended for our IG32 right angle gear motors. It includes the M3 screws needed to mount the IG32 gear motors.
The chassis is made from 3/32" thick aluminum and is cut on our CNC plasma table and bent on our CNC break press. The chassis also has mounting holes for four PWM motor controllers.
This is a single bearing 4WD base Programmable robot kit that uses Nexus mecanum wheels and hubs. The Arduino platform is meant for indoor robotics. It can vector in any direction. This kit can be used for autonomous development.
RPLIDAR A2 LIDAR is a 360-degree two-dimensional laser range scanner (LIDAR)
This is a MLT-JR tracked programmable robot platform and is equipped with 32mm motors, motor controller, and Arduino. This Arduino robot can be programmed to be a autonomous robot.