These chassis are designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots, an industry leader in robotics. This is a CNC cut chassis and accepts our IG32 and IG32P gear motors. The chassis is made from 3/32" thick aluminum and is cut on our CNC plasma table and bent on our CNC break press. This is the chassis for our 4WD ATR - IG32 DM.
The base is 11" x 14". The sides are 1.63" high (bottom edge to top surface). It weighs 1lb 6oz. The sides are stepped in 1/4". When used with the 6" Shaft and wheel sets it has a ground clearance of about 2.3". The width with the wheels is about 16.6" and the length is about 15.7".
This is a MLT-42-F tracked robot platform and is equipped with flipper arms, 42mm motors, a motor controller, and Spektrum remote control. This rugged robot platform the treaded robot handles up to 15lbs of additional payload and travels 150ft/min.
100 pack of square cable tie mounts with adhesive backing. 1/2 inch.