AnyVolt Micro is a miniature step-up / step-down switching DC-DC converter. The output is adjustable from 2.6V to 14V and currents up to 0.5A can be drawn. AnyVolt Micro is useful when you need to step from a lower voltage to a higher voltage, or when your input voltage occasionally dips below the output voltage.
The output voltage is set with a small screw potentiometer on the side of the AnyVolt Micro. Once the output voltage is set, it does not matter whether input voltage is higher, lower, or the same as the desired output i.e. there is no dropout voltage.
The AnyVolt Micro is pin-compatible with the common 78XX series of linear voltage regulators, so it will work with breadboards and other popular prototyping methods.
AnyVolt Micro is very different from any other DC-DC converter on the market so please read the entire datasheet thoroughly before buying or using one.
AnyVolt Micro is the smaller, lighter and cheaper successor to AnyVolt Mini. It also adds thermal, over-current and short circuit protection, making it very hard to kill.
The Dimension Engineering AnyVolt 3 Universal DC-DC Converter is an adjustable step up / step down 3A switching regulator. The output is adjustable from 3 to 24V.
Dimension Engineering DE-SWADJ is the adjustable version of our SW0XX step down voltage regulators. It is designed to be the easiest possible way to add an adjustable voltage source to a new or existing project.
This is a small tracked robot equipped with 42mm motors, a motor controller, and Spektrum remote control. This is a customized prebuilt version of TP-230-042 with added track brackets.
This is a direct drive 4WD robot kit that uses Nexus mecanum wheels. The mecanum wheels allow it to vector in any direction.