SuperDroid Robots
Robots, Parts, & Custom Solutions
##GOOGLEPLUS##
##PINTEREST##
Category
We have an array of programmable Arduino controllers. Using the top open-source platform for robot software development, our Arduino controllers provide the stability and performance desired by those experienced with designing robots.
Category List
Arduino Uno R3
Item Details
Arduino Uno R3
Item Name:
Arduino Uno R3
Item #:
MCU-050-000
Manufacturer:
Arduino
MPN:
A100066
Your Price:
$31.50
Availability:
16 Ready to Ship!
Quantity:

Product Image Gallery:

SuperDroid Robots is a authorized reseller of this authentic Arduino product.

Description:

The Arduino Uno is a microcontroller board based on the ATmega328. It has 20 digital input/output pins (of which 6 can be used as PWM outputs and 6 can be used as analog inputs), a 16 MHz resonator, a USB connection, a 2.5mm center positivce power jack, an in-circuit serial programming (ICSP) header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 programmed as a USB-to-serial converter. This auxiliary microcontroller has its own USB bootloader, which allows advanced users to reprogram it.

The Arduino has a large support community and an extensive set of support libraries and hardware add-on “shields” (e.g. you can easily make your Arduino wireless with the Wixel shield), making it a great introductory platform for embedded electronics.

This is the 3rd revision of the Uno (R3), which has a number of changes:

  • The USB controller chip changed from ATmega8U2 (8K flash) to ATmega16U2 (16K flash). This does not increase the flash or RAM available to sketches.
  • Three new pins were added, all of which are duplicates of previous pins. The I2C pins (A4, A5) have been also been brought out on the side of the board near AREF. There is a IOREF pin next to the reset pin, which is a duplicate of the 5V pin.
  • The reset button is now next to the USB connector, making it more accessible when a shield is used.

More information about the Arduino Uno R3 is available on Arduino’s website.

Features and Specifications:

  • Microcontroller: ATmega328
  • Operating voltage: 5 V
  • Input voltage (recommended): 7-12 V
  • Digital I/O pins: 20 (of which 6 provide PWM output)
  • Analog input pins: 6*
  • DC current per I/O pin: 40 mA
  • DC current for 3.3V pin: 50 mA
  • Flash memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
  • SRAM: 2 KB (ATmega328)
  • EEPROM: 1 KB (ATmega328)
  • Clock speed: 16 MHz
  • Size: 2.95" x2.1"
  • Weight: 28 g
  • Processor: ATmega328 @ 16 MHz
  • RAM size: 2048 bytes
  • Program memory size: 31.5 Kbytes
  • Motor channels: 0
  • User I/O lines: 20 (See Note 1)
  • Max current on a single I/O: 40 mA
  • Minimum operating voltage: 7 V
  • Maximum operating voltage: 12 V
  • Reverse voltage protection?: N
  • External programmer required?: N (See Note 2)

* The Arduino Uno has 20 total available I/O lines; all of them can function as digital I/O lines, and six of them can be used as analog inputs.

Notes:

  1. All 20 can be used as digital I/O and 6 can be used as analog inputs
  2. An external programmer is required for setting the fuses or upgrading the bootloader.

Documentation and Support:

 



This authentic Arduino Uno is a microcontroller board based on the ATmega328. It has 20 digital input/output pins, a 16 MHz resonator, a USB connection, a power jack, an in-circuit system programming (ICSP) header, and a reset button.
Support Links
Related Items
Programmable MLT-JR Tracked Development Robot
TP-220-002

This is a MLT-JR tracked programmable robot platform and is equipped with 32mm motors, motor controller, and Arduino. This Arduino robot can be programmed to be a autonomous robot.

$625.03
Built to Order
3-7 Days

Stackable 0.100" Female Header Set for Arduino Shields
TE-163-000

These stackable 0.1" (2.54 mm) female headers are just the right height for connecting Arduino shields to Arduinos and other shields.

$1.99
49 Ready to Ship!

New Items
NEW Prebuilt MLT-JR Tracked Robot RC Platform 075 RPM With Encoders And Speed Control
TP-500-262

This is a MLT-JR tracked robot platform and is equipped with 32mm motors, a motor controller, and FLYSKY remote control. This robot is a prebuilt version of TP-220-001, and can handle up to 10lbs of additional payload/speeds up to 85 feet per minute.

$990.00
1 Ready to Ship!
LST10 24VDC 120 RPM Wheel Chair Motor Pair
TD-292-120

This is a set of wheelchair motors and make great heavy duty robot motors. One left motor and one right motor. They are right angle gear drives with a release and electric brakes. They are 24VDC and the operating speed is 120 RPM.

$479.00
22 Ready to Ship!
Powered by SuperDroid Robots, Inc