SuperDroid Robots
Robots, Parts, & Custom Solutions
##GOOGLEPLUS##
##PINTEREST##
Category
NiMH and NiCad Chargers for robot kits.
Category List
AstroFlight 112 Deluxe Charger/Discharger
Item Details
AstroFlight 112 Deluxe Charger/Discharger
Item Name:
AstroFlight 112 Deluxe Charger/Discharger
Item #:
TE-073-112
Manufacturer:
AstroFlight
Your Price:
$144.00
Availability:
4 Ready to Ship!
Quantity:

Description:

This charger replaces the AstroFlight 110D. This Deluxe Digital Peak Charger/Discharger can charge any 2 to 40 cell Nicad or Nimh pack, from the tiny 50 mahr cells to giant 9,000 mahr cells. The 112 can also discharge these packs and measure their milliamp-hour capacity. Works from 12vdc. You can plug it up to a car battery (NOT a car battery charger though), or you can use our 100W 12V supply that runs from 115VAC.

The source side of the charger has about 40" long 13 Gage wires with aligator clips for connecting to your 12V source. The charging end is 13 Gage ~8" long with plug. We also include the matching connetor so you can make a jumper to go you your battery.

Features and Specifications:

  • Minimum Cells: 1 cell
  • Maximum Cells: 40 cells
  • Maximum Charge rate: 9 amps
  • Minimum Charge rate: 50 ma
  • Charge Time cut off: 10 hours
  • Discharge Rate: 1.25 amps
  • Discharge cut off: 70% of initial voltage
  • Current Display: 50 ma to 8 amps
  • Voltage Display: 0 volt to 80 volts
  • Charge time Display: hrs, min and seconds
  • Milliamp hour Display: 0 to 9,999 milliamp hours
  • Supply Voltage: 12 to 15 volts
  • Supply Current: 0.1 to 18 amps
 



The Astro 112D Digital Peak Charger/Discharger can charge any 2 to 40 cell Nicad or NiMH pack, from 50 mahr cells to 9,000 mahr cells. The 112 can also discharge packs and measure milliamp-hour capacity. Works from 12VDC.  Includes matching connector!
Support Links
Related Items
12VDC 100W Switching Power Supply
TE-038-000

This is a perfect power source for the AstroFlight Charger. It has 12V output @ 9A continuous.

$53.95
4 Ready to Ship!

New Items
Programmable GPS Mobile 4WD Robot Development Platform - IG42 SB
TP-600-455

This is a 4WD IG42 single bearing platform that is setup for outdoor navigation/positioning. A full array of sensor options including an IMU, motor encoders, and a Garmin 18x GPS that can provide position feedback with up to 3 meter accuracy.

$4,264.61
Built to Order
3-6 Weeks
 IPS - Indoor Navigation Positioning Beacon with IMU (HW v4.9)
TS-078-010

Mount beacons on walls or ceilings to measure distance to other beacons and “hedgehog” using ultrasonic pulses. They communicate with router wirelessly in ISM band. Powered by LiPo battery or USB. The beacon has a built in Inertial Measurement Unit (IMU).

$89.00
10 Ready to Ship!
Powered by SuperDroid Robots, Inc