Add 360+ degrees of Pan and ~50 degrees of Tilt capabilities to your larger cameras. These are the same pan and tilts we use on our WiFi ATRs. This system consists of the necessary brackets and hardware to allow you to pan and tilt your larger cameras. Two servos are required for its operation and selected as default options below. The pan servo option is a sail winch servo that mounts to the included base. The pan servo is geared down 3:1, the full range of the sail winch servo is about 4.5 turns, resulting in over 360 degrees of rotation with most RC controllers. The tilt servo option is a standard servo that is geared down 2:5 to the titt the bracket. Higher torque and metal gear servos are also available as options below for the tilt. If you already have the servos, you can deselect the options below.
The video below shows the pan and tilt on one of our WiFi All Terrain Robots
The GPS 18x is an OEM, high-sensitivity GPS sensor for use in automotive, fleet vehicle, and electronics applications that require a small, highly accurate GPS receiver.
This robot uses custom length sides and 10 inch tires with IG52 285 RPM motors. We have included everything to make it ready to run including batteries, chargers, and a controller.