Add 360+ degrees of Pan and ~110 degrees of Tilt capabilities to your camera. This system consists of the necessary brackets and hardware to allow you to pan and tilt your camera or sensor. Two servos are required for its operation and selected as default options below. The panning servo option is a sail winch servo that mounts to the included base. The pan servo is geared down 3:1, the full range of the sail winch servo is about 4.5 turns, resulting in over 360 degrees of rotation with most RC controllers. The tilt servo optionis a standard servo directly coupled to the tilt bracket. Higher torque and metal gear servos are also available as options below for the tilt. If you already have the servos, you can deselect the options below.
The tilt tab can be left flat as pictured (this limits the tilt range some), bent up as in the video below, or cut off. Select the desired option below.
This is a tilt system driven by a servo. It is perfect for small to medium cameras and/or sensors. The system will tilt from -10 degrees to 90.
100 pack of square cable tie mounts with adhesive backing. 1.1 inch.
100 pack of square cable tie mounts with adhesive backing. 1/2 inch.