This item does not qualify for free shipping.
This is a prebuilt robot. Ready to ship, fully assembled and ready to run. It is very lightly used (it was built August 2014). The robot is configured as listed below. If you desire a custom configuration please follow this link and select the options you desire. If you require further customization, please fill out our custom robot request form.
The robot was built for the new TV series, All-American Makers. This robot will air on February 18th, 2015. We have updated the robot since the show. We have upgraded the HAZMAT sensor to a MultiRAE PGM-6228 HAZMAT sensor to deliver precise environmental feedback to the operator. The sensor package includes a protective transport case, chargers, and calibration gas. Be sure to check us out on the TV show!
This is SuperDroid Robots LT2-F Tactical Robot. The LT2-F was qualified during a series of NIST tests. The robot package includes a custom remote, front tilt camera, and battery charging station. With the included Stabilizer Flipper Arms, the robot is capable of climbing over virtually anything as tall as the robot is long. Its low profile and compact size make it a great tool for going into collapsed structures or under cars, yet is large enough to get upstairs, etc. with ease.
The Robot is set up with many extra features for first responders to analyze hazardous situations remotely keeping personnel safe. This robot is set up with a HAZMAT gas sensor and painted red. It also comes with a 360-degree pan and tilt camera with a 27X zoom camera. The zoom camera has manual and autofocus. The camera and HAZMAT sensor payloads are mounted on a rail system making them removable based on different scenarios.
This tactical surveillance robot comes with the recommended and most popular setup.
This robot uses custom length sides and 13 inch tires with IG52 136 RPM motors. We have included everything to make it ready to run including batteries, chargers, and a controller.
This is a 2.5mm x 5.5mm right angle barrel plug with 6ft of 18 gauge wire. This will plug into our camera receivers and some of our cameras.