This wheel and shaft set is for direct mounting our 13" tiller tires onto our wheel chair motors. Each shaft comes with qty. 2 set screws to fix the wheel shaft to the motor shaft. Using the wheelchair motors and these wheels, your robot will drive about 5 miles per hour.
Inflate tires before use! Underinflated tires can spin on the rim rupturing the tube inside.
These shafts are made to order and may require a 1-3 business days before shipment.
These is a a single axle that mounts to our 13 inch traction lug tire. It is for direct driving with our wheelchair motors. They are steel with a 5mm keyway.
Heavy duty robot wheel with aggressive tread. It does not have a bearing. It's 13 inches in diameter. 4" inches wide. Its pneumatic with a 5 bolt pattern so you can easily mount it to a flanged hub.
This robot uses custom length sides and 10 inch tires with IG52 285 RPM motors. We have included everything to make it ready to run including batteries, chargers, and a controller.
This is a pair of 10" wheels and shafts. The shafts are machined steel with a welded hub. They are for our Heavy Duty and Enclosed Heavy Duty ATRs. These will not work for our Standard ATRs.