This is a 3 port 10.100Mbps Fast Ethernet switch module. The module comes as the assembled PCB as shown above. This is perfect for extending a cabling run or enabling a small Ethernet based network. The small size and low power nature of this module makes it perfect for robotic applications.
The 3 10/100Mbps Ethernet switches module each port to support Auto-Negotiation function. For Broadband local area network provides an economical, practical, cost-effective 10/100Mbps LAN sharing, The same times, for connect to each end-user on the LAN to provide stable performance and High-Throughout data transfer, each port support store-and-forward mode, it can effectively isolate the broadcast storms, reducing the packet error and the wrong packet, to avoid network congestion and conflict.
The switch module provides half-duplex flow control and full-duplex mode backpressure mode on all ports, It can to improve bandwidth server and network protocol compatibility. The same time, the LED indicator to diagnose the operating status of each port and the entire system, This switch energy saving and environmental protection.
Features and Specifications:
- Complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3x standards
- 3 port 10/100Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX
- Dimension(W x H x D): 60 x 50 x 18mm
- Input Power Requirements: 12V < 200mA (transformer not included by default, see options below)
- Product pass CE and ROHS Certification
- Non-blocking switching architecture that forward and filter packets at wire-speed for maximum throughput
- Support MAC address auto-learning and auto-aging
- LED indicators for monitoring power, link/activity
- Chip: RTL8306S
- OEM/ODM, Professional custom Ethernet switch module
- Protocol: CSMA/CD
- Topology: Star
- Transmit Method: Store-and-Forward
- Network Medium:
- 10Base-T:Cat 3 or above Cat.3 UTP(≤100m)
- 100Base-TX:Cat 5 UTP(≤100m)
- Switch capacity: 1G
- UPLINK: Any port (support Auto-MDI/MDIX function)
- Operating Temperature 0 C~40 C (32 F~104 F)
- Storage Temperature -40 C~70 C (-40 F~158 F)
- Operating Humidity 10%~90% non-condensing
- Storage humidity 5%~95% non-condensing
- LED Indications:
- 1* power LED(Power: Red)
- 3* port LEDs(Link/Act: Green)
This Switch module comes with a JST XHP power connector. If you want a connector to mate to it you can choose from the following options:
- A JST with a 12" lead with bare ends.
- A JST with a 12" lead to 2.1x5.5mm female barrel plug.
- A JST with lead to barrel plug and 12V power supply.