The image gallery displays robots built using this platform.
If assembly is chosen as an option below, this item will not qualify for free shipping. Description:
This All Terrain Robot (ATR) is designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots, an industry leader in robotics. This is a 2WD robot that uses our
IG42 motors and can use 6 inch tires, 10 inch standard tires, or 10 inch tiller tires. It uses our motor mount tubes to mount two IG42 motors and a single ball bearing to take most of the load off of the motor shaft. A single caster is mounted in the rear of the robot. The robot uses differential steering (movement is based on two separately driven wheels placed on either side of the robot body. It can thus change its direction by varying the relative rate of rotation of its wheels). The 2WD robot is excels at turning with heavy loads and on high friction surfaces where a 4WD robot might have trouble. See our ATR page for more details about our All Terrain Robots. If you need this robot customized beyond the provided options below, Contact us. Standard Configuration:
The standard items and options are listed below. They are listed as links and can be clicked to view further details. We offer many different motors, motor controllers, batteries, etc. so you can configure the robot to your exact needs. If you change to a different motor voltage, be sure you select the correct batteries and motor controllers. The weight of the robot, its capacity, speed, etc. depend on how the robot is configured. The item details of the options listed below will specify weights, sizes, etc. The lower RPM motors have lower speed, but more torque for easier turning. The default options listed below are what we recommend as a good starting point. Contact us if you need help selecting options or need custom configuration.
This robot can be configured with encoders used for telemetry and/or speed control. They are very useful if you are planning on making your robot semi-autonomous. Our motors use hall-effect encoders.
For help selecting the encoder options, read this blog post:
For more information, check out these blog posts:
Contact us if you need help selecting options or need a custom configuration. Documentation and Support:
This item is Built to Order and usually ships in 2-4 Days.
Assembly will add approximately 1 week.
Need it faster?