SuperDroid Robots
Robots, Parts, & Custom Solutions
##GOOGLEPLUS##
##PINTEREST##
Category
Accelerometers, Gyros, GPS, & Compasses. Measure acceleration and track rotation with these accelerometers, gyroscopes, compasses/magnetometers, and combined inertial measurement units (IMUs) and orientation sensors.
Category List
IPS - Indoor Navigation Positioning System DSP Starter Set NIA v5.07
Item Details
IPS - Indoor Navigation Positioning System DSP Starter Set NIA v5.07
Item Name:
IPS - Indoor Navigation Positioning System DSP Starter Set NIA v5.07
Item #:
TS-078-300
Manufacturer:
Marvelmind Robotics
MPN:
4680038530180-DSP
Your Price:
$499.00
Availability:
7 Ready to Ship!
Quantity:

Description:

Marvelmind Indoor Navigation System is an off-the-shelf indoor navigation system designed to provide precise (±2cm) location data to autonomous robots vehicles (AGV), drones and forklifts. It can also be used to track other objects that the mobile beacon is installed upon, for example, virtual reality (VR) systems, helmets for construction workers or miners, jackets, etc.

The Additional DSP Beacon for IPS - Indoor Navigation Positioning System DSP Starter Set NIA v5.07 is an integral part of indoor GPS navigation system. Marvelmind Indoor Navigation System is an off-the-shelf indoor navigation system designed to provide precise (±2cm) location data to autonomous robots, vehicles (AGV), drones and forklifts. It can also be used to track other objects that the mobile beacon is installed upon, for example, virtual reality (VR) systems, helmets for construction workers or miners, jackets, etc.

The navigation system is based on stationary ultrasonic beacons that are united by radio interface in a license-free band (915MHz). The location of the mobile beacon is calculated based on the propagation delay of an ultrasonic signal (Time-Of-Flight or TOF) to a set of stationary ultrasonic beacons using trilateration.

Acronyms: Indoor Positioning System (IPS), Non-Inverse Architecture (NIA), Virtual Reality (VR). Autonomous Ground Vehicles (AGV), Inertial Measurement Unit (IMU), Digital Signal Processing (DSP)

DSP beacons can work in Non-Inverse and in Inverse Architectures. Read more about the architectures.

This Starter Set is for Non-Inverse Architecture

Key requirements for the system to function properly:

  • For 3D (X, Y, Z) tracking – An unobstructed line of hearing/sight by a mobile beacon to three or more stationary beacons simultaneously
  • For 2D (X, Y) tracking – An unobstructed line of hearing/sight by a mobile beacon to two or more stationary beacons simultaneously
  • Distance to the nearest 2 or 3 beacons – not more than 30 meters (recommended). In ideal conditions – up to 50 meters

The DSP beacon HW 5.xx differs from regular Beacon HW v4.9 in several ways:

  • It is an RX-only beacon, i.e. it can receive, but it cannot transmit ultrasonic signal
  • The fact that it is RX-only makes it far more sensitive, i.e. you will get a longer range between Beacon HW v4.9 and DSP v5.xx than between Beacon HW v4.9 and Beacon HW v4.9
  • DSP beacon can receive any ultrasonic frequency from the bands: 19kHz, 25kHz, 31kHz, 37kHz, 45kHz, 56kHz. The filter can be simply selected in the Dashboard. At the same time, the working ultrasonic frequency of Beacon HW v4.9 is HW-defined by ultrasonic sensors and can’t be changed
  • DSP beacon can receive several ultrasonic frequencies at once. That is used in Inverse Architecture. See the comparison
  • The DSP Beacon is signficantly smaller, than Beacon HW v4.9
  • The DSP Beacon can work with regular Beacons HW v4.9 in any combination as a part of a Starter Set or as a part of navigation systems and it is a superior RX-only replacement to HW v4.9. At the same time, since it is RX-only beacon, the Beacons HW v4.9 are here to stay as universal dual-use beacons

Features:

Content

Distance between beacons

  • Reach up to 50 meters in lab conditions
  • Recommended distance is 30 meters (Transducer of Beacon HW v4.9 looking straight at Beacon DSP HW v5.xx)
  • Range of stable tracking of DSP beacon + Beacon HW v4.9 is 20-50% bigger, than the range of Beacon HW v4.9 + Beacon HW v4.9 in the same conditions

Coverage area

  • Reach up to 1000 m2 with the Starter Set configurations
  • Coverage for larger territories is similar to cellular networks

Location precision

  • Absolute: 1–3% of the distance to the beacons
  • Differential precision: ±2 cm
  • Differential precision is on par or better than in the Beacon HW v4.9, partially, because the sensor is a point – not as spread sensors of HW v4.9; and, partially, because of higher processing power and more advanced algorithms of the DSP beacon

Location update rate

Non-Inverse Architecture:
  • 0.05–25Hz
  • Can be set manually or in automatic mode
  • Depends on the distance between the mobile and stationary beacons (shorter distance — higher update rate)
  • Depends on the number of mobile beacons: for example, update rate of 25Hz for 1 mobile beacon will result in update rate of 25Hz/2 for 2 mobile beacons, and 25Hz/3 – for 3 mobile beacons, etc. – TDMA approach
  • Depends on the radio interface profile (500kbps vs. 38kbps)
Inverse Architecture:
  • 0.05–25Hz. With IMU fusion enabled – up to 100Hz
  • Can be set manually or in automatic mode
  • Depends on the distance between the mobile and stationary beacons (shorter distance — higher update rate)
  • Doesn’t depend on the number of mobile beacons – all of them are receiving
  • Depends on the radio interface profile (500kbps vs. 38kbps)

Power supply and battery lifetime

Internal:
  • LiPol battery 750mAh
  • Battery lifetime totally depends on usage
  • Stationary beacon with 8Hz update rate => up to 30h
  • tationary beacon with 1Hz update rate => 1 week
  • Future power saving features may increase battery life to 1year and more
External:
  • microUSB – recommended for permanent use

Weight

  • 25g (board + battery + plastic housing)
  • 9g (board only)

Size

  • 47x42x15mm

Documentation and Support:

Video:

 



Indoor GPS Starter Kit featuring one Modem and five Beacons to get your project running. Accurately position your robot to a couple centimeters indoors!  Kit includes one modem, 4 standard beacons and 1 beacon with built in IMU.
Support Links
Related Items
ROS Autonomous Programmable IPS Wheeled Robot
TP-600-445

This is a ROS programmable autonomous SLAM robot prebuilt kit that can be controlled via Gamepad. The MarvelMind IPS (Indoor Positioning System) provides indoor navigation. ODROID-XU4 SBC provides the most flexible platform possible.

$3,750.00
Built to Order
3-6 Weeks

 IPS - Indoor Navigation Positioning System Starter Kit with IMU (HW v4.9)
TS-078-200

Indoor GPS Starter Kit featuring one Modem and five Beacons to get your project running. Accurately position your robot to a couple centimeters indoors! Kit includes 4 standard beacons and 1 beacon with built in IMU.

$429.00
8 Ready to Ship!

New Items
Plastic Enclosure
TE-325-000

ABS Plastic Multipurpose Enclosures w/ Card Guides 1591 Series Flame Retardant, General Purpose, Flanged Lid or Bottom

$11.60
19 Ready to Ship!
4" Black Cable Tie (100 Pack)
TE-316-004

100 pack of black UV resistant nylon with flexible tape section, pull tight and does not come undone. Length 4 inches.

$3.12
231 Ready to Ship!
Powered by SuperDroid Robots, Inc