The bases are laser cut to ensure exact match up of hole sizes etc for mounting parts on your ATR or Vectoring Robot. The bases are made of 0.125" thick Aluminum for high strength, light weight, and it won't rust. You can also get them in 0.125" thick acrylic too so you can see through your robot. The bases can be stacked giving you lots of room for additional components. If you are going to load this robot up, the aluminum is stronger.
The bases are designed around the motor housings. The larger motor housing will only fit on the smaller rectangular base in the 45 degree position, if you plan to put the motors perpendicular (for standard straight driving) the larger motor housings will only fit the larger rectangular base.
The bases are laser cut to ensure exact match up of hole sizes etc for mounting parts on your ATR or Vectoring Robot.
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A.
This is our LT2-F NIST qualified security robot with an enclosed robot chassis with rear flippers/stabilizers, camera tilt system, custom controller, video console, and battery charging station.