This is a pair of All Terrain reinforced 2.75 inch wide matched treads for the LT2 Treaded Robot. These are the generation 4 design. They have 4 ply mesh reinforcement, molded rubber with no splice. If you want the wheels and tracks, see our 4th generation LT2 wheel set and track set.
The multi-ply treads have an aggressive black rubber all-terrain 2.75" wide pattern. The inside of the tracks have a internal cleat that is used for positive timing to match the CNC manufactured LT2 wheels. The tracks have UHMW tapered guides screwed into the side that are matched with the taper on our generation 4 wheels. This allows for better tracking and very low probability of derailing. The track does NOT have a splice! Its continuous. The nominal center to center distance of these tracks with the LT2 wheels is 19.875". The weight of each track is ~3lbs.
The tracks can be ordered with a custom length. Since they are molded, a custom length will take up to 6 weeks to complete.
This is a pair of All Terrain reinforced 2.75 inch wide tracks with 4 wheels for the LT2 Treaded Robot. These are the generation 4 design. They have 4 ply mesh reinforcement, molded rubber with no splice. Custom lengths can be ordered.
This is a pair of All Terrain reinforced 2.75 inch wide tracks for UGVs. They have a mesh reinforcement, molded rubber with no splice. This is the same track used on our LT2 minus the guide cleats.
This is a 1.75" x 1.75" x .125" thick aluminum plate designed to mount our IG42 motors.
This is our LT2-F NIST qualified security robot with an enclosed robot chassis with rear flippers/stabilizers, camera tilt system, custom controller, video console, and battery charging station.