This a prebuilt robot assembled from the 4WD WiFi Controlled Mobile Robot - IG32. The robot is being sold in the configuration listed below. The prebuilt robot is fully assembled, tested and is ready to run. For a customized configuration please follow the preceding link and select the options you desire on the bottom of the item page. If further customization is required, please fill out our Custom Robot Request Form. This item does not qualify for free shipping.
This is SuperDroid Robot's Wi-Fi All Terrain Robot, programmed and fully assembled. The robot is 4WD and is controlled from a PC over a Wi-Fi connection. Equipped with an IP camera mounted on a 360 degree pan and tilt system, it provides you with unparalleled vision.
The Wi-Fi controlled IG32 ATR includes the complete robot, program, gamepad controller so you can drive the robot right out of the box. Thanks to the on-board wireless bridge, the robot can be configured to work from anywhere that has internet access with your program.
The robot itself is an extremely rugged well-built. This isn’t your ordinary WiFi robot. The wheels are axle mounted and are supported using sealed ball bearings. The motors are powerful, at 24V and 190RPM it will move quickly and easily on most terrains. The rugged frame is made of 1/8" thick aluminum and hand welded.
Outfitted with 6” rubber foam core tires provides 2” of ground clearance. A total width (including wheels) is ~17.5" and the total length is ~21". The robot weighs about 30lbs and an additional 15lbs of payload in most terrains. The standard motors drive this robot up to 300 feet per minute. Powered by two 12V 7,000 mAhr SLA batteries provides 1.5 to 5 hours of use on a single charge, depending on use.
2WD self balancing robot! This kit is a perfect plataform for learning Arduino, PID control, serial communications(Serial, I2C, SPI), PWM signals, IMU filtering, etc.
100 pack of black UV resistant nylon with flexible tape section, pull tight and does not come undone. Length 11 inches.