SuperDroid Robots
Robots, Parts, & Custom Solutions
##GOOGLEPLUS##
##PINTEREST##
Category
These are some of our Pre-Built, Fully Assembled, and Tested Robot kits that have sold. If you see something you like, let us know and we can build it again for you!
Category List
NEW Prebuilt HD2 Treaded ATR Tank Robot Platform - SOLD
Item Details
NEW Prebuilt HD2 Treaded ATR Tank Robot Platform - SOLD
Item Name:
NEW Prebuilt HD2 Treaded ATR Tank Robot Platform - SOLD
Item #:
TP-500-299
Manufacturer:
SuperDroid Robots
Your Price:
$6,920.00
Availability:
We're sorry, this item is currently out of stock. Please contact us for availability.

Product Image Gallery:

Description:

This a prebuilt robot assembled from the HD2 Treaded ATR Tank Robot Platform. The robot is being sold in the configuration listed below. The prebuilt robot is fully assembled, tested and is ready to run. For a customized configuration please follow the preceding link and select the options you desire on the bottom of the item page. If further customization is required, please fill out our Custom Robot Request Form. This item does not qualify for free shipping.

The HD2 is a large tracked robotic development platform designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots, an industry leader in robotics. It has the same chassis we use in our tactical robots. It is very rugged and can carry up to 100 lbs. of additional payload depending on the motors selected. The large platform allows the robot to easily climb obstacles, ascend stairs, and drive over most terrain.

It's a tank, so we built it like one. The wheels are supported with inner and outer race sealed ball bearings (the wheels are NOT cantilevered or direct driven from the gear motor shaft). The wheels are driven with powerful IG52 gear motors a heavy duty #35 chain. The chassis is made from aircraft grade aluminum. The design uses all CNC cut parts with mortise and tenon design for precise alignment and mating of the parts. The frame is ribbed and gusseted making it very rigid. The aluminum is welded together for a solid chassis. The robot is enclosed and can be sealed to make it water tight. We have designed this robot to be as simple as possible without compromising its strength, durability, or functionality. You can get more information on the HD2 on our support page.

Prebuilt Configuration:

  • Includes HD2 Chassis with hardware, chains, electronics, etc.
  • HD2 Pair of Tracks and Wheel Set - Generation 4
  • Qty 8: HD2 Idler Rollers with bearings and shafts
  • Qty 2: Front Motors: IG52-04 24VDC 285 RPM Gear Motor.
  • Qty 2: Rear Motors: IG52-04 24VDC 285 RPM Gear Motor.
  • Qty 2: K2 25.6V LiFePO4 Battery Pack.
  • Battery chargers.
  • HD2 Battery Mounts.
  • Sabertooth Dual 32A Motor Driver.
  • FLYSKY FS-i6 2.4G 6CH Transmitter & Receiver.
  • Dimensions: The total length of the robot (track tip to tip) is about 39 inches. by about 9 1/2" high (tread height) and 20 inches wide. The robot is completely symmetric and invertible. There is a very large center cavity for batteries, electronics, cameras, computers, etc. The motors are half inside the tread and protrude into the center cavity. The bottom cover is flanged and all the holes are CNC cut and then hand tapped for a perfect fit and seal.
  • Speed: The robot is currently geared with a 1:3 reduction (gear motor to drive wheels). The robot as configured will travel about 235ft/min with 285 RPM motors and its 1:3 reduction with 9.5" tall treads.
  • Weight: The robot as configured weighs about 90lbs.
  • Capacity: The robot can take a payload of about 50lbs. Skid steering is the main limiting factor with the capacity (in order to turn the tracks must skid, additional weight makes this very difficult with high traction treads).
  • Assembly: This robot is fully assembled and tested.

Documentation and Support:

Videos:


Delivery:

  • This robot is fully assembled and ready to ship. Please allow 1-2 days to pack for shipment.
  • Contact us if you need expedited delivery.

Additional Information:

This is a very large and heavy package. The price includes building a custom wooden shipping crate. This is a large package and will have to ship freight. We will contact you to inform you of the additional shipping costs.

This kit does not include a microcontroller, sensors, etc. Some basic control packages are listed. See our HD2-S for a complete tactical HD2 solution. See our Treaded HD2 Support Page and our ATR support page for more information.


The HD2 tracked platform is a large, heavy duty tracked robot with the power to pull a truck and climb stairs. A wealth of internal space allows for batteries, controls and an optional computer. Customized version of item TP-200-001.
Support Links
New Items
NEW PREBUILT - 4WD IG52-SB-T Custom Size Robot
TP-500-314

A ready to ship prebuilt All-Terrain 4WD robotic platform. It features 10" pneumatic tires and IG52 136RPM gear motors. RC controller, battery, and charger included.

$1,901.99
1 Ready to Ship!
NEW Prebuilt HD2-S Robot with 6 Axis Arm
TP-500-296

This is a Custom Configuration HD2 Mastiff Robot with a 6 axis robotic manipulator arm. This robot is loaded with all the options and is ready to ship.

$44,668.69
1 Ready to Ship!
Powered by SuperDroid Robots, Inc