This item does not qualify for free shipping.
This is our second generation of the LT robot. Fully assembled and ready to go. It is the same chassis that we offer with our tactical LT2 robot. The LT2 treaded robot is lighter weight than the HD2 Treaded robot. The LT2 will climb most household stairs. For more aggressive/steeper stairs or stairs with big noses (deep or no kickplates), a rear flipper is recommended as with the LT2-F Treaded Robot. The LT2 Treaded robot is an affordable treaded robot that can be easily transported (weighing about 40 lbs) and is small and can handle most terrains with its aggressive all terrain treads.
The robot is a lightweight and tough and can drive over and under many obstacles. The treads are driven by powerful IG52 gear motors and #25 chain with a 1:2 reduction to the ~ 7 inch front wheels. The robot axles are solid high strength steel so they will not bend if the robot is dropped. We have designed this robot to be as simple as possible without compromising its strength, durability, or functionality. The LT2-F tactical version of this robot has been NIST tested and qualified. The chassis also uses our LT2 track and wheels, which would not derail under any circumstance NIST testing or ourselves could dish out. See our LT2/LT2-F Bloodhound for a tactical solution using this robot chassis.
This is a complete package that includes everything listed below. It includes robot chassis, motors, batteries, chargers, controls, etc. Fully assembled and ready to run.
This robot is already built and ready to ship. Please allow an extra day for us to top off the batteries and box up the Robot. Contact us if you need expedited delivery.
Since this is a large item it must ship freight. Freight costs will be added after checkout.
Coaxial pigtails are used to connect wireless radios to antennas and other equipment. This series features pigtails which support U.FL connectors & 1.13 Mini Coax.
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A.