This a prebuilt robot assembled from the MLT-42 Tracked Robot. The robot is being sold in the configuration listed below. The prebuilt robot is fully assembled, tested and is ready to run. For a customized configuration please follow the preceding link and select the options you desire on the bottom of the item page. If further customization is required, please fill out our Custom Robot Request Form. This item does not qualify for free shipping.
This small-but-useful robot is designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots, an industry leader in robotics. It is a smaller version of our LT2 and HD2 tanks, but built with the same high level of quality, strength, power, etc. This is not a plastic imported robot that will disappoint you. It performs exceptionally well for its size and is intended as a small, maneuverable, customizable tracked robot platform.
The robot comes with a welded aluminum chassis and track brackets that prevent unwanted climbing when inside a pipe of confined space. Each track is driven by a planetary gear motor delivering smooth reliable power. The sprocket wheels are mounted directly to the motor output shaft and an idler wheel is bolted to the chassis. The tracks are molded 4 ply seamless tracks offering exceptional strength and quality. The motor and track combination allow this robot to go over most terrain, yet its size makes it very maneuverable indoors. The robot uses differential steering (movement is based on two separately driven wheels placed on either side of the robot body. It can thus change its direction by varying the relative rate of rotation of its tracks). The kit provides you with what you need to make a compact affordable All-Terrain tracked robot.
This is a MLT-42 tracked robot platform and is equipped with 42mm motors, a motor controller, and an RC remote control. This is a rugged robot platform. By default, the treaded robot handles up to 15lbs of additional payload and travels 200ft/min.
900 MHz Rubber Duck Antenna - SMA Male Connector
The power distribution board features a 5V 5A regulator, and a 12V 2.2A regulator to supply your next project with power safely, and efficiently.