This is a prebuilt RC All Terrain Robot Kit that has all the main features to get you going. Ready to ship, fully assembled and ready to run. The robot is configured as listed below. If you desire a custom configuration please follow this link and select the options at the bottom of the page. If you require further customization, please fill out our custom robot request form.
The MLT-JR is designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots, an industry leader in robotics. It is a smaller version of our LT2 and HD2 tanks, but built with the same high level of quality, strength, power, etc. This is not a plastic imported robot that will disappoint you. It performs exceptionally well for its size and is intended as a small maneuverable customizable tracked robot platform.
The robot comes with a welded aluminum chassis, wheels hubs and tracks. Each track is driven by a planetary gear motor delivering smooth reliable power. The sprocket wheels are mounted directly to the motor output shaft and an idler wheel is bolted to the chassis. The tracks are molded 4 ply seamless tracks offering exceptional strength and quality. The motor and track combination allow this robot to go over most terrain, yet its size makes it very maneuverable indoors. The robot uses differential steering (movement is based on two separately driven wheels placed on either side of the robot body. It can thus change its direction by varying the relative rate of rotation of its tracks). The kit provides you with what you need to make a compact affordable All-Terrain tracked robot.
This is a pair of All Terrain reinforced 2 inch wide tracks for UGVs. They have a mesh reinforcement, molded rubber with no splice. Different lengths can be ordered. This is the same set of treads we use on the MLT treaded robot.
This is a MLT-JR tracked programmable robot platform and is equipped with 32mm motors, motor controller, and Arduino. This Arduino robot can be programmed to be a autonomous robot.
This is our prebuilt HD2-S robot modified with a 5 axis robotic manipulator arm. This robot is loaded with all the options including a programmable Arduino. Ready to ship.
This is a 2.25" x 3.25" x .125" thick aluminum plate designed to mount our IG52 motors.