This is a prebuilt version of the SST inspection robot, our compact tethered All Terrain Inspection Robot that has all the main features to get you going. It is designed for inspection in tight spaces and has a footprint of only 9.5 X 6.75. With the camera looking straight ahead it is 6" high. It features a wide view color 7 IR camera so you can see in both dark and light places with a pan-and-tilt system giving you full coverage of the space you are in. The robot is controlled wirelessly with a simple RC controller and it drags a cable to get the video signal back. Simply plug in the RCA cable into the supplied LCD screen to get the video feed from the robot. This makes for a simple and robust system.
The SST is designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots, an industry leader in robotics. It is a smaller version of our MLT tank, but is built with the same high level of quality, strength, and power. This is not a plastic imported robot that will disappoint you. It performs exceptionally well for its size and is intended as a small maneuverable customizable tracked robot platform.
The robot comes with an aluminum chassis, wheels hubs and tracks. Each track is driven by a planetary gear motor delivering smooth reliable power. The sprocket wheels are mounted directly to the motor output shaft and an idler wheel is bolted to the chassis. The tracks are molded 4 ply seamless tracks offering exceptional strength and quality. The motor and track combination allow this robot to go over most terrain, yet its size makes it very maneuverable indoors. The robot uses differential steering (movement is based on two separately driven wheels placed on either side of the robot body. It can thus change its direction by varying the relative rate of rotation of its tracks).
The robot is configured as listed below. This robot is a prebuilt item meaning it is fully assembled, tested, and ready to ship and comes with a 4.5in LCD monitor. If you require further customization, please fill out our custom robot request form.
This is a 4WD IG42 single bearing platform that is setup for outdoor navigation/positioning. A full array of sensor options including an IMU, motor encoders, and a Garmin 18x GPS that can provide position feedback with up to 3 meter accuracy.
Use these roll pins to fix sprockets to a shaft and keep them locked in place.