This is a version of the SST inspection robot, our compact tethered All Terrain Inspection Robot that has all the main features to get you going. It is designed for inspection in tight spaces and has a footprint of only 6.5" x 10.75". With the camera looking straight ahead it is 5.75" high. It features a wide view color camera with build in LEDs so you can see in both dark and light places with a pan-and-tilt system giving you full coverage of the space you are in. The robot is controlled though a standard ethernet cable. Simply plug in the cable into the robot and controller. The controller has an RCA cable that you plug into an LCD of your choice. We have different sizes available. This makes for a simple and robust system.
The SST is designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots, an industry leader in robotics. It is a smaller version of our MLT tank, but is built with the same high level of quality, strength, and power. This is not a plastic imported robot that will disappoint you. It performs exceptionally well for its size and is intended as a small maneuverable customizable tracked robot platform.
The robot comes with an aluminum chassis, wheels hubs and tracks. Each track is driven by a planetary gear motor delivering smooth reliable power. The sprocket wheels are mounted directly to the motor output shaft and an idler wheel is bolted to the chassis. The tracks are molded 4 ply seamless tracks offering exceptional strength and quality. The motor and track combination allow this robot to go over most terrain, yet its size makes it very maneuverable indoors. The robot uses differential steering (movement is based on two separately driven wheels placed on either side of the robot body. It can thus change its direction by varying the relative rate of rotation of its tracks).
The robot is configured as listed below. This robot is a prebuilt item meaning it is fully assembled and tested. If you require further customization, please fill out our custom robot request form.
This ATR robot uses custom length sides and 10 inch tires. We have included everything to make it ready to run including batteries, controllers, chargers, etc.
100 pack of black UV resistant nylon with flexible tape section, pull tight and does not come undone. Length 11 inches.