This a prebuilt robot assembled from a customized version of
PTW-42 4WD Inspection and Surveillance Robot. The robot is being sold in the configuration listed below. The prebuilt robot is fully assembled, tested and is ready to run. For a customized configuration please follow the preceding link and select the options you desire on the bottom of the item page. If further customization is required, please fill out our Custom Robot Request Form. This item does not qualify for free shipping.
The robot is remote controlled via a tablet over wifi. It features a high quality camera with 360 degrees of pan, -10, +50 degrees of tilt, and a 27x optical zoom. It also has a front bumper to avoid flipping the robot if driven into a wall.
This custom WiFi controlled IG42 Enclosed ATR includes the robot, 7" tablet, tablet program, WiFi Bridge, Ethernet converter, Pan Tilt Zoom (PTZ) camera, and Video Server. The drive, pan, tilt, zoom, and lights on/off are all controlled by the tablet which features audio to and from the robot. If you set up your router with port forwarding, you can control and monitor your robot from anywhere that has internet access with your program.
The robot itself is extremely rugged and well-built. The wheels are axle mounted and supported using sealed ball bearings. The motors allow this robot to climb hills and curbs. The chassis is 1/8" thick aluminum custom designed to fit our IG42 motors and all of the electronics. The aluminum is all cut using our CNC Plasma table for a precision fit and then hand welded.
As configured it has a ground clearance of about 4". The width with the wheels (wheel edge to wheel edge) is about 22" and the length is about 26". The robot is equipped with 10" pneumatic traction lug wheels. The robot weighs about 47 lbs and can handle 25lbs of additional payload in most terrains. The robot can travel up to 320 feet per minute. It includes the Wi-Fi Custom Control Interface Package. Powered by
(2) 12V 10Ahr LIFE PO4 batteries (with charger provided) and (1) High Power Polymer Li-Ion Module 11.1V 5Ah battery providing 1-4.5 hrs of use on a single charge depending on use. It also features an 11.1 volt Lithium battery for the control system of the robot to keep drive power and control power separate.
It is currently fully assembled, tested, and ready to run. The robot is configured as listed below. To customize this robot further or to add more features
Contact us. Applications
Remote Monitoring - Compact, lightweight and fast you can control this robot from anwhere
Remote Surveillance - The 360 Pan and 90 degree tilt camera with 27X Optical Zoom allows the robot to see everything.
Entry into difficult areas - This 4WD robot is very quick and has the ability to traverse many obstacles that often stop other robots.
Clearing rooms remotely - Clear rooms and buildings remotely with audio and video surveillance. Pre-Built Configuration
Documentation and Support
This robot is prebuilt, please allow 1-2 days for shipment.
Contact us if you need expedited delivery. Video