SuperDroid Robots
Robots, Parts, & Custom Solutions
##GOOGLEPLUS##
##PINTEREST##
cww trust seal
Category
These are our current on sale boards and modules.
Optical IR Sensors. IR distance sensors make it easy to detect and range objects.
Category List
QTR-3A Reflectance Sensor Array - ON SALE
Item Details
QTR-3A Reflectance Sensor Array - ON SALE
Item Name:
QTR-3A Reflectance Sensor Array - ON SALE
Item #:
TS-064-000
Your Price:
$4.95  $2.50
Availability:
15 Ready to Ship!
Quantity:

Product Image Gallery:

Description

This compact module packs three IR LED/phototransistor pairs onto a 1.25″ × 0.3″ board. The sensors are mounted on a 0.375″ pitch, making this array a great minimal sensing solution for a line-following robot. Each sensor provides a separate analog voltage output.

Note: The QTR-3A reflectance sensor array requires analog inputs to take readings. The similar QTR-3RC reflectance sensor array is available with digital I/O-compatible outputs.

The QTR-3A reflectance sensor array is intended as a line sensor, but it can be used as a general-purpose proximity or reflectance sensor. The module is a convenient carrier for three IR emitter and receiver (phototransistor) pairs. With sensors spaced at intervals of 0.375″ (9.525 mm) along of the board’s longer axis, this array works well as a minimal detector for line-following robots, as line-following courses are commonly made using 3/4″ (19 mm) black electrical tape. The middle sensor is slightly offset along the short axis of the board.

Each phototransistor is connected to a pull-up resistor to form a voltage divider that produces an analog voltage output between 0 V and VCC (which is typically 5 V) as a function of the reflected IR. Lower output voltage is an indication of greater reflection.

The LED current-limiting resistors are set to deliver approximately 17 mA to the LEDs when VCC is 5 V, making the total board consumption just over 50 mA. The schematic diagram of the module is shown above:

This module has two mounting holes intended for #2 screws (not included); if the mounting holes are not needed, the ends of the PCB can be ground off to make the unit even smaller (less than 1″ wide). The reflectance sensor array ships with a 1×5 straight male header strip and a1×5 right-angle male header strip as shown below. You can also solder wires, such as ribbon cable, directly to the pads for the smallest installation.

Features and Specifications

  • Dimensions: 1.25″ × 0.3″ × 0.1″ (32 × 8 × 3 mm) (without header pins installed)
  • Operating voltage: 5.0 V
  • Supply current: 50 mA
  • Output format: 3 analog voltages
  • Output voltage range: 0 V to supplied voltage
  • Optimal sensing distance: 0.125" (3 mm)
  • Maximum recommended sensing distance: 0.25" (6 mm)
  • Weight without header pins: 0.02 oz (0.6 g)

Interfacing with the QTR-3A Outputs

There are several ways you can interface with the QTR-3A outputs:

  • Use a microcontroller’s analog-to-digital converter (ADC) to measure the voltages.
  • Use a comparator with an adjustable threshold to convert each analog voltage into a digital (i.e. black/white) signal that can be read by the digital I/O line of a microcontroller.
  • Connect each output directly to a digital I/O line of a microcontroller and rely upon its internal comparator.

Documentation and Support

 



This compact module packs three IR LED/phototransistor pairs onto a 1.25″ × 0.3″ board. The sensors are mounted on a 0.375″ pitch, making this array a great minimal sensing solution for a line-following robot.
Support Links
Related Items
Pololu Zumo Reflectance Sensor Array
TS-060-000

The Zumo reflectance sensor array provides an easy way to add line sensing or edge detection to a Zumo robot. It features six separate reflectance sensors, each consisting of an IR emitter coupled with a phototransistor.

$9.95
9 Ready to Ship!

QTR-3RC Reflectance Sensor Array - ON SALE
TS-063-000

This compact module packs three IR LED/phototransistor pairs onto a 1.25″ × 0.3″ board.

$4.95  $2.50
58 Ready to Ship!

New Items
CUSTOM Prebuilt - 6WD IG52-SB-T Custom Size Robot
TP-500-360

A ready to ship custom prebuilt All-Terrain 6WD robotic platform. It features 10" pneumatic tires and IG52 136RPM gear motors. RC controller, battery, and charger included.

$2,489.00
1 Ready to Ship!
NEW Prebuilt MLT-JR Wireless Tracked Development Robot
TP-500-305

This is a MLT-JR tracked programmable robot platform and is equipped with 32mm motors, motor controller, and Arduino. This Arduino robot can be programmed to be a autonomous robot.

$1,288.79
1 Ready to Ship!
Powered by SuperDroid Robots, Inc