SuperDroid Robots
Robots, Parts, & Custom Solutions
##GOOGLEPLUS##
##PINTEREST##
Category
NiMH and NiCad Chargers for robot kits.
Category List
Smart Charger for 19.2V - 24V NiMH and NiCad
Item Details
Smart Charger for 19.2V - 24V NiMH and NiCad
Item Name:
Smart Charger for 19.2V - 24V NiMH and NiCad
Item #:
TE-106-024
Your Price:
$29.95
Availability:
11 Ready to Ship!
Quantity:

Product Image Gallery:

Description:

Universal Smart Charger (1.5A) with Temperature sensor for 19.2V-24V NiMH/ NiCad Battery Packs

Features and Specifications:

  • One standard Tamiya male connector installed with the charger.
  • One set connector adaptor from female tamiya to Clips is included for charging any battery pack.
  • One temperature sensor (70 C thermister) is included for battery packs that don't have thermostat protection. It must be connected between battery charger and the battery pack before charging to protect battery from overcharging. It will cut-off power if battery temperature is over 70 C
  • How to use Temperature sensor:
    1. Attach temperature sensor to battery pack inside firmly --- you can use electronic tape or glue to attach the sensor to the battery's surface
    2. Plug (red, BEC ) connector into the temperature socket into the charger
  • Universal Fast and Smart Charger is designed for charging any 19.2V - 24V NiMH and NiCd Battery Packs with capacity > 1500mAh (16-20 Cell packs). We do not recommend this charger for batteries < 2500mAhr.
  • It is a very smart charger. Just plug it in and wait for the battery to get charge.
  • 100-240V AC input for worldwide use.
  • The charger cuts off power Automatically by negative delta V IC when the battery pack is fully charged.
  • Protection fuse for over current, short circuit & reverse polarity protection.
  • Battery will be charged at 1.5A constant current
  • Charging time can be estimated as the follows:
    • Charging time ( Hrs ) = 1.2x Battery capacity ( Ah) / 1.5
    • For 3 Ah battery pack, charging time is about 2.5 hrs.
    • For 13Ah battery pack, charging time is about 10 hrs.
  • Dimensions: 2.0"H X 2.7"W X 5.8"L.
  • Weight: 15 OZ.

Documentation and Suppport:

Warning:

  • Please don't use the 19.2V-24V charger for charging battery packs with voltage <19.2V or voltage >24V and capacity <1500 mAh. We do not recommend this charger for batteries < 2500mAhr.
  • The charger is designed for indoor use only.
  • Battery pack must be made by high drain current cell.
  • Please contact your seller for any damage and consequent damage by misuse
  • The charger should be horizontally positioned and works in well ventilated conditions, avoid wet and keep it away from flammable explosive goods.
  • Don't cover the charger when charging. Ambient temperature shall not be more than 40 degree C.
  • Cut off the power supply before connect or disconnect the charger with batteries. Also make sure battery polarity is connected correctly
  • Don't try to disassemble the charger high voltage inside, danger!
 



Universal Smart Charger (1.5A) with Temperature sensor for 19.2V-24V NiMH/ NiCad Battery Packs
Support Links
Related Items
Smart Charger Extra Temperature Sensor
TE-107-000

Extra Temperature Sensor for the Smart Chargers.

$3.99
11 Ready to Ship!

Smart Charger for 9.6V - 18V NiMH and NiCad
TE-106-018

Multi-Current Smart Charger (0.9 - 1.8A) For any 9.6V - 18V NiMH / NiCad Battery Packs

$28.95
14 Ready to Ship!

New Items
Roll Pin, 3/32" x 1" Long (pack of 4)
TD-181-100

Use these roll pins to fix sprockets to a shaft and keep them locked in place.

$2.79
49 Ready to Ship!
LIDAR-Lite Mounting Bracket
TD-183-000

$4.50
191 Ready to Ship!
Powered by SuperDroid Robots, Inc